ML100-54/95/103 Pepperl + Fuchs Electronic Components

Product Details

• Optical face
  frontal
• Reflector distance
  0.01 ... 3.5 m
• Light source
  LED
• Operation indicator
  LED green: power on
• Voltage drop
  ≤ 1.5 V DC
• Housing depth
  20 mm
• Polarization filter
  yes
• Ambient light limit
  EN 60947-5-2:2007+A1:2012
• Switching voltage
  max. 30 V DC
• UL approval
  cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
• Degree of protection
  IP67
• Opening angle
  approx. 4 °
• Diagnostic Coverage (DC)
  0 %
• Product standard
  EN 60947-5-2
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Light type
  modulated visible red light
• No-load supply current
  < 20 mA
• Housing width
  11 mm
• Tightening torque, fastening screws
  0.6 Nm
• Operating voltage
  10 ... 30 V DC
Switching frequency
1000 Hz
Ambient temperature
-30 ... 60 °C (-22 ... 140 °F)
Diameter of the light spot
approx. 350 mm at a distance of 4.5 m
MTTFd
860 a
Signal output
1 PNP output, short-circuit protected, reverse polarity protected, open collector
Ripple
max. 10 %
EAC conformity
TR CU 020/2011
Housing
PC (Polycarbonate)
Mass
approx. 10 g
Threshold detection range
4.5 m
Mission Time (TM)
20 a
Response time
0.5 ms
Connection
Connector M8 x 1 , 4-pin
Reference target
H50 reflector
Function indicator
LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted
Switching type
The switching type of the sensor is adjustable. The default setting is: light-on
Housing height
31 mm
Effective detection range
0 ... 3.5 m
Control elements
sensitivity adjustment
Switching current
max. 100 mA , resistive load
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)

ML100-54/95/103 Related Documents