ML100-55-5575 Pepperl + Fuchs Electronic Components

Product Details

• Diameter of the light spot
  approx. 350 mm at a distance of 4.5 m
• Diagnostic Coverage (DC)
  0 %
• Switching type
  The switching type of the sensor is adjustable. The default setting is: light-on
• Housing width
  11 mm
• Reference target
  H50 reflector
• MTTFd
  860 a
• Mission Time (TM)
  20 a
• Product standard
  EN 60947-5-2
• Degree of protection
  IP67
• Opening angle
  approx. 4 °
• Function indicator
  LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted
• Switching voltage
  max. 30 V DC
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Tightening torque, fastening screws
  0.6 Nm
• Light type
  modulated visible red light
• Switching current
  max. 100 mA , resistive load
• Housing depth
  20 mm
• Effective detection range
  0 ... 3.5 m
• Threshold detection range
  4.5 m
• Control elements
  sensitivity adjustment
Ripple
max. 10 %
Voltage drop
≤ 1.5 V DC
Response time
0.5 ms
Ambient temperature
-30 ... 60 °C (-22 ... 140 °F)
Mass
approx. 20 g
Cable length
0.3 m
Light source
LED
Ambient light limit
EN 60947-5-2:2007+A1:2012
Operating voltage
10 ... 30 V DC
UL approval
cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
Connection
300 mm fixed cable with M8 connector, 4-pin
Reflector distance
0.01 ... 3.5 m
No-load supply current
< 20 mA
EAC conformity
TR CU 020/2011
Housing
PC (Polycarbonate)
Polarization filter
yes
Operation indicator
LED green: power on
Signal output
1 PNP output, short-circuit protected, reverse polarity protected, open collector
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Optical face
frontal
Switching frequency
1000 Hz
Housing height
31 mm

ML100-55-5575 Related Documents