ML100-55-8943/120/115B-0,8M Pepperl + Fuchs Electronic Components

Product Details

• Polarization filter
  yes
• Control elements
  sensitivity adjustment
• UL approval
  cULus Listed, Class 2 Power Source or listed Power Supply with a limited voltage output with (maybe integrated) fuse (max. 3.3 A according UL248), Type 1 enclosure
• Mass
  approx. 30 g
• Opening angle
  approx. 4 °
• Operation indicator
  LED green: power on
• Signal output
  2 PNP outputs, complementary, short-circuit protected, reverse polarity protected, open collector
• Ambient temperature
  -30 ... 60 °C (-22 ... 140 °F)
• Cable length
  0.8 m
• Light source
  LED
• Ambient light limit
  EN 60947-5-2
• Ripple
  max. 10 %
• Product standard
  EN 60947-5-2
• Housing width
  11 mm
• Optical face
  frontal
• Switching type
  The switching type of the sensor is adjustable. The default setting is: Q - Pin4: PNP normally closed / light-on /Q - Pin2: PNP normally open / dark-on
• Degree of protection
  IP67
• Effective detection range
  0 ... 5 m
• Diagnostic Coverage (DC)
  0 %
• Switching voltage
  max. 30 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Light type
modulated visible red light
Mission Time (TM)
20 a
Voltage drop
≤ 1.5 V DC
Housing depth
20 mm
Threshold detection range
7 m
Operating voltage
10 ... 30 V DC
Switching frequency
1000 Hz
Connection
800 mm fixed cable with 4-pin, right-angled, M12 x 1 connector
Diameter of the light spot
approx. 500 mm at a distance of 7 m
No-load supply current
< 20 mA
CCC approval
CCC approval / marking not required for products rated ≤36 V
Housing
PC (Polycarbonate)
Reference target
H50 reflector
Function indicator
LED yellow: lights up when receiving the light beam ; flashes when falling short of the operating reserve; OFF when light beam is interrupted
Response time
0.5 ms
Tightening torque, fastening screws
0.6 Nm
Reflector distance
0.01 ... 5 m
MTTFd
860 a
Switching current
max. 100 mA , resistive load
Housing height
31 mm

ML100-55-8943/120/115B-0,8M Related Documents