ZQ 900 ST-AS N Schmersal Electronic Components

Product Details

• Standards
  IEC 61508, EN 60947-5-1, EN 50295
• Terminal Connector
  Connector plug M12, 4-pole, (A-coding)
• Storage and transport temperature, minimum
  -25 °C
• Degree of pollution to VDE 0100
  3
• AS-i, IO-Code
  0x0
• AS-i Outputs, DO 0 … DO 3
  No Function
• Length of the wire, maximum
  50 m
• Width of sensor
  71.5 mm
• Storage and transport temperature, maximum
  +85 °C
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i, ID-Code2
  0xF
• AS-i Input module address
  0
• Gross weight
  1,365 g
• Ambient temperature, minimum
  -25 °C
• Rated insulation voltage Ui
  32 V
• Switching frequency
  3,600 /h
• AS-i Profile
  S-0.B.F.F
• AS-i Parameter bits, P1
  No function
• Length of sensor
  97 mm
• Restistance to shock
  15 g / 11 ms
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i, ID-Code1
0xF
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Enclosure material
Zinc die-cast, paint finish
Height of the Sensor, maximum
236.3 mm
Overvoltage category
III
Switching principle
Snap switch element
AS-i Version
V 3.0
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Parameter bits, P3
No function
Mechanical life, minimum
100,000 Operations
Emergency-Stop button
Yes
Ambient temperature, maximum
+60 °C
Note (Relative humidity)
non-condensing, non-icing
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i Parameter bits, P2
No function
Material of the cover
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Actuating travel
400 mm
Degree of protection
IP65, IP67 to EN 60529
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm, 10 … 150 Hz, with 5 g
AS-i Operating voltage, minimum
18 VDC
AS-i, ID-Code
0xB
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
Reaction time, maximum
100 ms
Actuating force, maximum
200 N
Height of the Sensor, minimum
220.3 mm
Relative humidity, maximum
95 %
Enclosure coating material
painted
Relative humidity, minimum
30 %
Operating Current
50 mA
AS-i Parameter bits, P0
Channel 2 switched
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device

ZQ 900 ST-AS N Related Documents