T1R 235-20Z Schmersal Electronic Components

Product Details

• Mechanical life, minimum
  20,000,000 Operations
• Actuating speed, maximum
  1 m/s
• Length of sensor
  30 mm
• Utilisation category DC-13
  1 A
• Number of auxiliary contacts
  2
• Actuating speed, minimum
  160 mm/min
• Height of sensor
  91.5 mm
• Thermal test current
  10 A
• Switching frequency
  5,000 /h
• Actuating element
  Offset roller lever
• Note (Switchover time)
  Switchover time in accordance with actuating speed
• Degree of protection
  IP65 to EN 60529, IP67 to EN 60529
• Actuating force, minimum
  9 N
• Material of the contacts, electrical
  Silver
• Cable section, minimum
  0.75 mm²
• Rated insulation voltage Ui
  250 V
• Housing construction form
  Norm construction design
• Note (Actuating speed)
  Actuating speed with actuating angle 30° to switch axis
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Utilisation category AC-15
  4 A
Enclosure material
Zinc die-cast, paint finish
Positive break force, minimum
19 N
Ambient temperature, maximum
+80 °C
Rated impulse withstand voltage Uimp
6 kV
Switching element
Normally open contact (NO)
Standards
IEC 60947-5-1, EN ISO 13849-1, BG-GS-ET-15
Note Bounce duration
Bounce duration in accordance with actuating speed
Ambient temperature, minimum
-30 °C
Gross weight
150 g
Terminal Connector
Screw terminals M20 x 1.5
Width of sensor
30 mm
Required rated short-circuit current to EN 60947-5-1
1,000 A
Cable section, maximum
2.5 mm²
Switching principle
Creep circuit element

T1R 235-20Z Related Documents