RSS260-ST-AS Schmersal Safety Switches

Product Details

• Integral System Diagnostics, status
  Yes
• Height of sensor
  29.5 mm
• Degree of protection
  IP65 to EN 60529, IP67 to EN 60529
• Rated impulse withstand voltage Uimp
  0.8 kV
• AS-i Version
  V 2.1
• AS-i Outputs, DO 0 … DO 3
  No Function
• Note (AS-i Input module address)
  Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
• Time to readiness, maximum
  2,000 ms
• Active principle
  RFID
• Number of actuating directions
  2
• Width of sensor
  40 mm
• Rated insulation voltage Ui
  32 VDC
• AS-i Operating voltage, minimum
  18 VDC
• AS-i, ID-Code1
  0xF
• AS-i Parameter bits, P3
  Internal device error (FID)
• Ensured switch distance OFF Sar, lateral
  15 mm
• Restistance to shock
  30 g / 11 ms
• AS-i Specification
  Safety-Slave
• AS-i Parameter bits, P0
  Actuator in
• Gross weight
  60 g
Enclosure material
Thermoplastic hotmelt
Ensured switching distance OFF, front
18 mm
Ambient temperature, minimum
-25 °C
AS-i Current consumption, maximum
100 mA
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
Duration of risk, maximum
200 ms
Safety functions
Yes
Ensured switching distance ON, front
10 mm
Ambient temperature, maximum
+60 °C
Overvoltage category
III
AS-i Profile
S-0.B.F.E
AS-i Parameter bits, P1
Enabling inhibit (tamper protection time) active (FID))
general information
Universal coding
Repeat accuracy R R
0.5 mm
Ensured switching distance ON, side
6 mm
Coding level according to ISO 14119
Low
Standards
IEC 61508, IEC 60947-5-3, EN ISO 14119
Switch distance Sn
12 mm, 9 mm (in case of approach from side)
Storage and transport temperature, minimum
-25 °C
Degree of pollution to VDE 0100
3
AS-i, ID-Code2
0xE
AS-i Input module address
0
Hysteresis (Switch distance), maximum
2 mm
Length of sensor
18 mm
Protection rating
III
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i, IO-Code
0x0
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF), FID: periphery error
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i, ID-Code
0xB
AS-i Parameter bits, P2
No function
Reaction time, maximum
100 ms
Coding
Yes
Terminal Connector
Connector M8, 4-pole, A-coded
Storage and transport temperature, maximum
+85 °C
Switching frequency, maximum
1 Hz
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission

RSS260-ST-AS Related Documents