RSS260-I1-ST-AS Schmersal Electronic Components

Product Details

• Enclosure material
  Thermoplastic hotmelt
• Number of actuating directions
  2
• Height of sensor
  29.5 mm
• Resistance to vibrations to EN 60068-2-6
  10 … 55 Hz, amplitude 1 mm
• Rated impulse withstand voltage Uimp
  0.8 kV
• general information
  Individual coding
• Integral System Diagnostics, status
  Yes
• Width of sensor
  40 mm
• Ensured switching distance OFF, front
  18 mm
• Protection rating
  III
• Note (AS-i Operating voltage)
  Protection against polarity reversal
• AS-i Version
  V 2.1
• AS-i Outputs, DO 0 … DO 3
  No Function
• Note (AS-i Parameter bits)
  Set the parameter outputs to "1111" (0xF), FID: periphery error
• Time to readiness, maximum
  2,000 ms
• Safety functions
  Yes
• Repeat accuracy R R
  0.5 mm
• Length of sensor
  18 mm
• Storage and transport temperature, maximum
  +85 °C
• Overvoltage category
  III
AS-i Current consumption, maximum
100 mA
AS-i, ID-Code2
0xE
Standards
IEC 61508, IEC 60947-5-3, EN ISO 14119
Reaction time, maximum
100 ms
Hysteresis (Switch distance), maximum
2 mm
Terminal Connector
Connector M8, 4-pole, A-coded
Restistance to shock
30 g / 11 ms
Degree of pollution to VDE 0100
3
AS-i Profile
S-0.B.F.E
AS-i, ID-Code
0xB
AS-i Input module address
0
Active principle
RFID
Coding
Yes
Ensured switch distance OFF Sar, lateral
15 mm
Ambient temperature, maximum
+60 °C
Switching frequency, maximum
1 Hz
AS-i Specification
Safety-Slave
AS-i Parameter bits, P0
Actuator in
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Coding level according to ISO 14119
High
Duration of risk, maximum
200 ms
Ensured switching distance ON, front
10 mm
Ensured switching distance ON, side
6 mm
Ambient temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Parameter bits, P2
No function
Gross weight
55 g
Switch distance Sn
12 mm, 9 mm (in case of approach from side)
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Storage and transport temperature, minimum
-25 °C
AS-i Operating voltage, minimum
18 VDC
AS-i, ID-Code1
0xF
AS-i Parameter bits, P1
Enabling inhibit (tamper protection time) active (FID))
AS-i Parameter bits, P3
Internal device error (FID)
AS-i, IO-Code
0x0
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission

RSS260-I1-ST-AS Related Documents