AZM40Z-I2-ST-1P2P Schmersal Safety Switches

Product Details

• general information
  Individual coding, multiple teaching
• Active principle
  RFID
• Time to readiness, maximum
  4,000 ms
• Coding level according to ISO 14119
  High
• Reaction time, maximum
  100 ms
• Standards
  IEC 61508, EN 60947-5-3, EN ISO 13849-1
• Enclosure material
  Glass-fibre, reinforced thermoplastic and light-alloy diecast
• Duration of risk, maximum
  200 ms
• Gross weight
  300.2 g
• Response time safety outputs in case of switch-off by safety inputs, maximum
  1.5 ms
• Latching
  Yes
• Manual release
  Yes
• Series-wiring
  Yes
• Short circuit detection
  Yes
• Guard locking monitored
  Yes
• Safety functions
  Yes
• Short-circuit recognition
  Yes
• Interlocking principle
  bistable
• Integral System Diagnostics, status
  Yes
• Number of safety contacts
  2
Mechanical life, minimum
200,000 Operations
Latching force
40 N
Clamping force in accordance with ISO14119 Fzh
2,000 N
Actuating speed, maximum
0.5 m/s
Clamping force, maximum Fmax
2,600 N
Ensured switch distance ON Sao
1 mm
Width of sensor
40 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Operating current
1,200 mA
Voltage, Utilisation category DC13
24 VDC
Type of the fixing screws
2 x M5 (Counter sunk screw)
Ambient temperature, maximum
+55 °C
Overvoltage category
III
Switching frequency, maximum
0.3 Hz
Ensured switch distance OFF Sar
8 mm
Storage and transport temperature, maximum
+85 °C
Rated operating voltage
24 VDC - 15 % / + 10 % (stabilised PELV)
Current leakage Ir
0.5 mA
Terminal Connector
Connector M12, 8-pole, A-coded
Storage and transport temperature, minimum
-40 °C
Degree of pollution to VDE 0100
3
Current consumption solenoid at switching moment, peak
600 mA / 100ms
Voltage drop Ud, maximum
2 V
Length of sensor
119.5 mm
Restistance to shock
30 g / 11 ms
Note
Cable length and cable section alter the voltage drop depending on the output current
Current consumption at 24V
5 mA
Versions
short-circuit proof, p-type
Height of sensor
20 mm
Rated impulse withstand voltage Uimp
0.8 kV
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Classification ZVEI CB24I, Sink
C1, C2
Current, Utilisation category DC13
0.05 A
Degree of protection
IP66 to EN 60529, IP67 to EN 60529
Protection rating
III
Required rated short-circuit current to EN 60947-5-1
100 A
Rated operating current (safety outputs)
250 mA
Current, Utilisation category DC12
0.05 A
Ambient temperature, minimum
+0 °C
No-load supply current I0
100 mA
Rated insulation voltage Ui
32 VDC
Voltage, Utilisation category DC12
24 VDC
Classification ZVEI CB24I, Source
C2

AZM40Z-I2-ST-1P2P Related Documents