AZM 161 B ST2-AS RAPT Schmersal Safety Switch Interlocks

Product Details

• Reaction time, maximum
  100 ms
• Emergency exit
  Yes
• Standards
  IEC 61508, EN 60947-5-1, EN 62026-2
• Power to lock
  Yes
• Active principle
  electromechanical
• Integral System Diagnostics, status
  Yes
• Enclosure material
  Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
• Latching force
  30 N
• Terminal Connector
  Connector plug M12, 4-pole, (A-coding)
• Clamping force
  2,000 N
• Actuator monitored
  Yes
• Mechanical life, minimum
  1,000,000 Operations
• Gross weight
  485 g
• Actuating play in direction of actuation
  5.5 mm
• Storage and transport temperature, maximum
  +85 °C
• Resistance to vibrations to EN 60068-2-6
  10 Hz ... 150 Hz, amplitude 0.35 mm
• AS-i Current consumption, maximum
  100 mA
• AS-i Outputs, DO 0
  Solenoid control
• AS-i Parameter bits, P2
  Magnet voltage in tolerance range
• Rated operating voltage
  24 VDC -15% / +10% (stabilised PELV)
Number of actuating directions
3
Storage and transport temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
AS-i Specification
Safety-Slave
AS-i, ID-Code
0xB
AS-i Parameter bits, P3
Error message - locking/unlocking of the solenoid interlock blocked
Width of sensor
130 mm
Ambient temperature, minimum
-25 °C
Overvoltage category
III
AS-i Operating voltage AS-i maximum
31.6 VDC
AS-i Input, Channel 1
Data bits DI 0 / DI 1 = dynamic code transmission
AS-i Input module address
0
Actuating speed, maximum
2 m/s
Ambient temperature, maximum
+60 °C
Relative humidity, maximum
95 %
Rated impulse withstand voltage Uimp
0.8 kV
AS-i Profile
S-7.B.F.E
AS-i Outputs, DO 1
No Function
Note (AS-i Input module address)
Preset to address 0, can be changed through AS-interface bus master or hand-held programming device
Length of sensor
30 mm
Relative humidity, minimum
30 %
Note (Relative humidity)
non-condensing, non-icing
Note (AS-i Operating voltage)
Protection against polarity reversal
AS-i, ID-Code1
0xF
AS-i Parameter bits, P1
Solenoid interlock locked
Operating current
500 mA
Connector position
Right
Restistance to shock
30 g / 11 ms
AS-i Operating voltage, minimum
26.5 VDC
AS-i, IO-Code
0x7
AS-i Outputs, DO 2
No Function
Note (AS-i Parameter bits)
Set the parameter outputs to "1111" (0xF)
Height of sensor
90 mm
Degree of pollution to VDE 0100
3
AS-i Version
V 2.1
AS-i, ID-Code2
0xE
AS-i Outputs, DO 3
No Function
Degree of protection
IP67 to EN 60529
Switching frequency
1,000 /h
Protection rating
II
AS-i Input, Channel 2
Data bits DI 2 / DI 3 = dynamic code transmission
AS-i Parameter bits, P0
Actuator detected

AZM 161 B ST2-AS RAPT Related Documents