WTS10-12-4016/103/105 Pepperl + Fuchs Electronic Components

Product Details

• Detection range
  2 ... 12 mm
• Shock and impact resistance
  IEC / EN 60068. half-sine, 50 g in each X, Y and Z directions
• EAC conformity
  TR CU 020/2011
• Light type
  modulated visible red light , 640 nm
• Function input
  Enable keys (EK)
• Product standard
  EN 60947-5-2
• Switching frequency
  100 Hz
• Switching type
  light-on
• Housing
  PC + ABS
• Tilting angle
  ± 1.5 °
• Signal output
  switching output PNP NO contact AND logic coupling of both sensor channels short-circuit protected reverse polarity protected
• Ambient temperature
  0 ... 50 °C (32 ... 122 °F), The switching accuracy will remain, if the temperature after Teach-In does not varies more than ±7 °C
• Mass
  80 g
• Operation indicator
  LED green: Power on
• Response time
  5 ms
• Vibration resistance
  IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
• Connection
  5-pin, M12 x 1 connector
• Ambient light limit
  continuous light 40000 Lux , Modulated light 5000 Lux
• Teach-In indicator
  LED, green/yellow flashing (approx. 4 Hz), Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
• UL approval
  cULus Listed
Reference target
Copper welding-electrode Diameter: 16 mm , Front end: 6 mm
Operating voltage
10 ... 30 V DC
Storage temperature
-20 ... 70 °C (-4 ... 158 °F)
Light source
LED
Control elements
Teach-In key
CCC approval
CCC approval / marking not required for products rated ≤36 V
Position tolerance
± 2 mm
Switching current
max. 100 mA
Protection class
II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
Optical face
Scratch resistant mineral glass lens
Function indicator
LED yellow: switching state, LED red: Stability alarm indicator
No-load supply current
≤ 70 mA
Degree of protection
IP67

WTS10-12-4016/103/105 Related Documents