WTS10-12/20/105 Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  Copper welding-electrode Diameter: 16 mm , Front end: 6 mm
• Control elements
  Teach-In key
• Protection class
  II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
• Optical face
  Scratch resistant mineral glass lens
• Position tolerance
  ± 2 mm
• Product standard
  EN 60947-5-2
• Connection
  5-pin, M12 x 1 connector
• Light source
  LED
• Switching current
  max. 100 mA
• Shock and impact resistance
  IEC / EN 60068. half-sine, 50 g in each X, Y and Z directions
• Housing
  PC + ABS
• Teach-In indicator
  LED, green/yellow flashing (approx. 4 Hz), Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
• Ambient temperature
  0 ... 50 °C (32 ... 122 °F), The switching accuracy will remain, if the temperature after Teach-In does not varies more than ±7 °C
• Tilting angle
  ± 1.5 °
• Switching type
  light-on
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Detection range
  2 ... 12 mm
• Switching frequency
  100 Hz
• Vibration resistance
  IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
• Function indicator
  LED yellow: switching state, LED red: Stability alarm indicator
Response time
5 ms
Degree of protection
IP67
Operation indicator
LED green: Power on
Operating voltage
10 ... 30 V DC
EAC conformity
TR CU 020/2011
Mass
80 g
Light type
modulated visible red light , 640 nm
No-load supply current
≤ 70 mA
UL approval
cULus Listed
Ambient light limit
continuous light 40000 Lux , Modulated light 5000 Lux
Signal output
2 switch outputs PNP, NO short-circuit protected reverse polarity protected
Storage temperature
-20 ... 70 °C (-4 ... 158 °F)

WTS10-12/20/105 Related Documents