WTS10-12/21/105 Pepperl + Fuchs Electronic Components

Product Details

• Detection range
  2 ... 12 mm
• Operation indicator
  LED green: Power on
• Shock and impact resistance
  IEC / EN 60068. half-sine, 50 g in each X, Y and Z directions
• Storage temperature
  -20 ... 70 °C (-4 ... 158 °F)
• Control elements
  Teach-In key
• Position tolerance
  ± 2 mm
• Vibration resistance
  IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
• Light type
  modulated visible red light , 640 nm
• Signal output
  2 switch outputs NPN, NO short-circuit protected reverse polarity protected
• Product standard
  EN 60947-5-2
• Mass
  80 g
• Function indicator
  LED yellow: switching state, LED red: Stability alarm indicator
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• No-load supply current
  ≤ 70 mA
• Response time
  5 ms
• Housing
  PC + ABS
• Protection class
  II, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
• Ambient light limit
  continuous light 40000 Lux , Modulated light 5000 Lux
• Switching current
  max. 100 mA
• Ambient temperature
  0 ... 50 °C (32 ... 122 °F), The switching accuracy will remain, if the temperature after Teach-In does not varies more than ±7 °C
Connection
5-pin, M12 x 1 connector
Reference target
Copper welding-electrode Diameter: 16 mm , Front end: 6 mm
Operating voltage
10 ... 30 V DC
Switching frequency
100 Hz
Degree of protection
IP67
Light source
LED
Tilting angle
± 1.5 °
UL approval
cULus Listed
Teach-In indicator
LED, green/yellow flashing (approx. 4 Hz), Teach Error:LED green/yellow non equiphase flashing; 8.0 Hz
Switching type
light-on
EAC conformity
TR CU 020/2011
Optical face
Scratch resistant mineral glass lens

WTS10-12/21/105 Related Documents