SU18-40A/110/115/123 Pepperl + Fuchs Electronic Components

Product Details

• Operation indicator
  LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
• Function input
  external Teach-In
• Product standard
  EN 60947-5-2
• Degree of protection
  IP50
• Ambient light limit
  10000 Lux
• Control elements
  Teach-In key, slide switch 2 positions: light/dark switching, slide switch 3 positions: timer function - timer off, on delay 40 ms, off-delay 40 ms, slide switch 3 positions: operating mode - normal, high speed , high resolution
• Response time
  Standard mode: 160 µs , High speed mode: 80 µs , High resolution: 1 ms
• Housing height
  34.5 mm
• Sensor range
  up to 150 mm (KLR-C02-2,2-2,0-K146)
• Operating voltage
  10 ... 30 V DC
• Repeat accuracy
  ≤ 0.5 % of adjusted sensor range
• Connection
  2 m PVC cable, 4 x 0,14 mm²
• Detection range
  up to 450 mm (KLE-C01-2,2-2,0-K116)
• Switching voltage
  max. 30 V DC
• EAC conformity
  TR CU 020/2011
• Mass
  45 g
• Light source
  LED
• Signal output
  1 push-pull (4 in 1) output NPN/PNP , short-circuit protected
• Switching frequency
  Standard mode: 3 kHz , High speed mode: 6 kHz , High resolution: 500 Hz
• Housing depth
  62.3 mm
Diagnostic Coverage (DC)
0 %
No-load supply current
≤ 30 mA
Storage temperature
-20 ... 70 °C (-4 ... 158 °F)
Light type
modulated visible red light , 660 nm
Switching type
light/dark on, switchable
Ambient temperature
-10 ... 55 °C (14 ... 131 °F)
Housing
PC
MTTFd
690 a
Switching current
max. 100 mA , resistive load
CCC approval
CCC approval / marking not required for products rated ≤36 V
Mission Time (TM)
20 a
Ripple
10 %
UL approval
cULus Listed, Class 2 Power Source, Type 1 enclosure
Function indicator
LED yellow: static illumination switching state, flashes when falling short of the stability control
Voltage drop
≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA
Housing width
9 mm

SU18-40A/110/115/123 Related Documents