SU18/35/40A/102/115/126A Pepperl + Fuchs Electronic Components

Product Details

• Light source
  LED
• Ripple
  10 %
• Switching frequency
  Standard mode: 3 kHz , High power mode: 1 kHz , Ultra mode: 100 Hz
• Housing depth
  62.3 mm
• Function indicator
  LED yellow: static illumination switching state, flashes when falling short of the stability control
• Switching current
  max. 100 mA , resistive load
• UL approval
  cULus Listed, Class 2 Power Source, Type 1 enclosure
• Sensor range
  up to 460 mm (KLR-C02-2,2-2,0-K146)
• Switching type
  light/dark on, switchable
• Storage temperature
  -20 ... 70 °C (-4 ... 158 °F)
• Operation indicator
  LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
• Stability alarm output
  1 NPN, short-circuit protected open collector
• Housing width
  9 mm
• Diagnostic Coverage (DC)
  0 %
• Signal output
  1 NPN, short-circuit protected open collector
• Ambient temperature
  -10 ... 55 °C (14 ... 131 °F)
• Housing
  PC
• Light type
  modulated visible red light , 640 nm
• No-load supply current
  ≤ 30 mA
• Product standard
  EN 60947-5-2
Mass
45 g
MTTFd
690 a
Switching voltage
max. 30 V DC
CCC approval
CCC approval / marking not required for products rated ≤36 V
Ambient light limit
10000 Lux
Operating voltage
10 ... 30 V DC
Repeat accuracy
≤ 0.5 % of adjusted sensor range
Housing height
34.5 mm
Mission Time (TM)
20 a
Control elements
Teach-In key, slide switch 2 positions: light/dark switching, slide switch 3 positions: timer function - timer off, on delay 40 ms, off-delay 40 ms, slide switch 3 positions: operating mode - Standard, High Power, Ultra
Response time
Standard mode: 160 µs , High power mode: 500 µs , Ultra mode: 5 ms
Degree of protection
IP50
Detection range
up to 1500 mm (KLE-C01-2,2-2,0-K116)
Voltage drop
≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA
EAC conformity
TR CU 020/2011
Connection
2 m PVC cable, 4 x 0,14 mm²

SU18/35/40A/102/115/126A Related Documents