SU18-16/40A/115A/120 Pepperl + Fuchs Electronic Components

Product Details

• Function indicator
  LED yellow: static illumination switching state, flashes when falling short of the stability control
• EAC conformity
  TR CU 020/2011
• Housing depth
  62.3 mm
• MTTFd
  690 a
• Control elements
  Potentiometer for setting sensitivity, slide switch 2 positions: light/dark switching, slide switch 3 positions: timer function - timer off, on delay 40 ms, off-delay 40 ms, slide switch 3 positions: operating mode - normal, high speed , high resolution
• Product standard
  EN 60947-5-2
• Sensor range
  up to 150 mm (KLR-C02-2,2-2,0-K146)
• Operating voltage
  10 ... 30 V DC
• Switching frequency
  Standard mode: 3 kHz , High speed mode: 6 kHz , High resolution: 500 Hz
• Housing height
  34.5 mm
• Light type
  modulated visible red light , 660 nm
• Signal output
  2 PNP, complementary, short-circuit protected, open collectors
• Housing width
  9 mm
• Mission Time (TM)
  20 a
• Ripple
  10 %
• UL approval
  cULus Listed, Class 2 Power Source, Type 1 enclosure
• Housing
  PC
• Diagnostic Coverage (DC)
  0 %
• Switching current
  max. 100 mA , resistive load
• Repeat accuracy
  ≤ 0.5 % of adjusted sensor range
Connection
200 mm, PVC cable with M8 connector, 4-pin
Ambient light limit
10000 Lux
No-load supply current
≤ 30 mA
Response time
Standard mode: 160 µs , High speed mode: 80 µs , High resolution: 1 ms
Degree of protection
IP50
Light source
LED
Switching voltage
max. 30 V DC
CCC approval
CCC approval / marking not required for products rated ≤36 V
Operation indicator
LED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Switching type
light/dark on, switchable
Ambient temperature
-10 ... 55 °C (14 ... 131 °F)
Detection range
up to 450 mm (KLE-C01-2,2-2,0-K116)
Voltage drop
≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA
Storage temperature
-20 ... 70 °C (-4 ... 158 °F)
Mass
45 g

SU18-16/40A/115A/120 Related Documents