OBT150-R100-2EP1-IO Pepperl + Fuchs Electronic Components

Product Details

• LED risk group labelling
  exempt group
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• Transfer rate
  COM2 (38.4 kBit/s)
• Product standard
  EN 60947-5-2
• Housing
  PC (Polycarbonate)
• Black-white difference (6 %/90 %)
  < 5 % at 150 mm
• Ripple
  max. 10 %
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Usage category
  DC-12 and DC-13
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Detection range min.
  5 ... 25 mm
• Operating voltage
  10 ... 30 V DC
• Compatible master port type
  A
• Switching frequency
  500 Hz
• Housing width
  11 mm
• Detection range
  5 ... 150 mm
• Mission Time (TM)
  20 a
• No-load supply current
  < 25 mA at 24 V supply voltage
• SIO mode support
  yes
• Housing height
  37.1 mm
Adjustment range
25 ... 150 mm
MTTFd
600 a
Device profile
Smart Sensor
Voltage drop
≤ 1.5 V DC
Housing depth
21.5 mm
Reference target
standard white, 100 mm x 100 mm
Opening angle
approx. 3 °
Protection class
III
Switching voltage
max. 30 V DC
Communication interface
IEC 61131-9
Mass
approx. 36 g
Light type
modulated visible red light
Control elements
Light-on/dark-on changeover switch
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Min. cycle time
2.3 ms
Switching current
max. 100 mA , resistive load
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Connection
2 m fixed cable
Diameter of the light spot
approx. 10 mm at a distance of 150 mm
IO-Link revision
1.1
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
2 m
Optical face
PMMA
Detection range max.
5 ... 150 mm
Diagnostic Coverage (DC)
0 %
Device ID
0x11060F (1115663)
EAC conformity
TR CU 020/2011
Degree of protection
IP67 / IP69 / IP69K
Light source
LED
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Interface type
IO-Link ( via C/Q = BK )
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - WH: NPN normally open / light-on, PNP normally closed / dark-on
Response time
1 ms

OBT150-R100-2EP1-IO Related Documents