OBT150-R100-2EP1-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• LED risk group labelling
  exempt group
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Diagnostic Coverage (DC)
  0 %
• Transfer rate
  COM2 (38.4 kBit/s)
• EAC conformity
  TR CU 020/2011
• Mass
  approx. 17 g
• Light type
  modulated visible red light
• MTTFd
  600 a
• No-load supply current
  < 25 mA at 24 V supply voltage
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Communication interface
  IEC 61131-9
• Housing height
  37.1 mm
• Adjustment range
  25 ... 150 mm
• Operating voltage
  10 ... 30 V DC
• Mission Time (TM)
  20 a
• Switching voltage
  max. 30 V DC
• SIO mode support
  yes
• Connection
  300 mm fixed cable with M12 x 1, 4-pin connector
• Detection range
  5 ... 150 mm
• Light source
  LED
Usage category
DC-12 and DC-13
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Detection range max.
5 ... 150 mm
Ripple
max. 10 %
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Switching frequency
500 Hz
Housing width
11 mm
Black-white difference (6 %/90 %)
< 5 % at 150 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
IO-Link revision
1.1
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on
Response time
1 ms
Housing
PC (Polycarbonate)
Detection range min.
5 ... 25 mm
Interface type
IO-Link ( via C/Q = pin 4 )
Compatible master port type
A
Degree of protection
IP67 / IP69 / IP69K
Diameter of the light spot
approx. 10 mm at a distance of 150 mm
Protection class
III
Min. cycle time
2.3 ms
Voltage drop
≤ 1.5 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
0.3 m
Opening angle
approx. 3 °
Device ID
0x11060F (1115663)
Switching current
max. 100 mA , resistive load
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Housing depth
21.5 mm
Reference target
standard white, 100 mm x 100 mm
Control elements
Light-on/dark-on changeover switch
Device profile
Smart Sensor
Process data width
Process data input 1 Bit, Process data output 2 Bit
Product standard
EN 60947-5-2
Optical face
PMMA

OBT150-R100-2EP1-IO-0,3M-V1 Related Documents