OBT15-R3-E2-0,2M-V31-P-L Pepperl + Fuchs Electronic Components

Product Details

• Mission Time (TM)
  20 a
• Operating voltage
  12 ... 24 V
• EAC conformity
  TR CU 020/2011
• Housing
  PC/ABS and TPU
• Light source
  laser diode
• Black-white difference (6 %/90 %)
  < 3 % at 15 mm
• Diameter of the light spot
  approx. 1.5 mm at a distance of 15 mm
• Switching voltage
  max. 30 V DC
• Switching current
  max. 50 mA , resistive load
• Product standard
  EN 60947-5-2
• Ambient temperature
  -20 ... 60 °C (-4 ... 140 °F)
• Housing width
  7.5 mm
• Housing height
  26 mm
• Beam divergence
  > 5 mrad
• Opening angle
  approx. 2 °
• Function indicator
  LED yellow: lights when object is detected
• UL approval
  E87056 , cULus Recognized, Class 2 Power Source
• Connection
  200 mm fixed cable with 4-pin, M8x1 connector
• Reference target
  standard white, 100 mm x 100 mm
• Wave length
  680 nm
Pulse length
approx. 3 µs
Detection range
7 ... 15 mm
Light type
modulated visible red light , 680 nm
Laser class
1
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Ambient light limit
EN 60947-5-2 : 30000 Lux
Switching frequency
approx. 2 kHz
Cable
PUR
max. pulse energy
9.5 nJ
Operation indicator
LED green, statically lit Power on , short-circuit : LED green flashing (approx. 4 Hz)
Laser safety
EN 60825-1:2007
Degree of protection
IP67
Diagnostic Coverage (DC)
0 %
Switching type
NO contact / light on
Response time
250 µs
Cable length
200 mm
MTTFd
800 a
Protection class
III
Voltage drop
≤ 1.5 V DC
Storage temperature
-30 ... 70 °C (-22 ... 158 °F)
Repetition rate
approx. 16.6 kHz
Signal output
1 PNP output, short-circuit protected, reverse polarity protected, open collector
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Mass
approx. 10 g
Optical face
frontal
No-load supply current
< 10 mA
CCC approval
CCC approval / marking not required for products rated ≤36 V
Housing depth
13.8 mm

OBT15-R3-E2-0,2M-V31-P-L Related Documents