OBT150-R100-2EP1-IO-IR Pepperl + Fuchs Electronic Components

Product Details

• Light source
  LED
• MTTFd
  600 a
• Transfer rate
  COM2 (38.4 kBit/s)
• Voltage drop
  ≤ 1.5 V DC
• Housing width
  11 mm
• Detection range
  5 ... 150 mm
• IO-Link revision
  1.1
• Switching voltage
  max. 30 V DC
• Product standard
  EN 60947-5-2
• Degree of protection
  IP67 / IP69 / IP69K
• Black-white difference (6 %/90 %)
  < 5 % at 150 mm
• Protection class
  III
• Device ID
  0x110611 (1115665)
• Usage category
  DC-12 and DC-13
• Housing depth
  21.5 mm
• Light type
  modulated infrared light 850 nm
• LED risk group labelling
  exempt group
• Diagnostic Coverage (DC)
  0 %
• No-load supply current
  < 25 mA at 24 V supply voltage
• Device profile
  Smart Sensor
Compatible master port type
A
Switching current
max. 100 mA , resistive load
Housing height
37.1 mm
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Mass
approx. 36 g
Detection range max.
5 ... 150 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Operating voltage
10 ... 30 V DC
Min. cycle time
2.3 ms
Communication interface
IEC 61131-9
Connection
2 m fixed cable
Adjustment range
25 ... 150 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
Response time
1 ms
Housing
PC (Polycarbonate)
Reference target
standard white, 100 mm x 100 mm
Mission Time (TM)
20 a
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
SIO mode support
yes
Switching frequency
500 Hz
EAC conformity
TR CU 020/2011
Diameter of the light spot
approx. 12 mm at a distance of 150 mm
Interface type
IO-Link ( via C/Q = BK )
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Cable length
2 m
Detection range min.
5 ... 25 mm
Opening angle
approx. 4 °
Ripple
max. 10 %
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - WH: NPN normally open / light-on, PNP normally closed / dark-on
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA

OBT150-R100-2EP1-IO-IR Related Documents