OBT150-R100-2EP-IO Pepperl + Fuchs Electronic Components

Product Details

• Diameter of the light spot
  approx. 10 mm at a distance of 150 mm
• Ripple
  max. 10 %
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Detection range
  5 ... 150 mm
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• Protection class
  III
• Transfer rate
  COM2 (38.4 kBit/s)
• Voltage drop
  ≤ 1.5 V DC
• Housing depth
  21.5 mm
• Adjustment range
  25 ... 150 mm
• MTTFd
  600 a
• Device ID
  0x11060E (1115662)
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Switching current
  max. 100 mA , resistive load
• Housing width
  11 mm
• Mass
  approx. 36 g
• Light source
  LED
• No-load supply current
  < 25 mA at 24 V supply voltage
• SIO mode support
  yes
Switching frequency
500 Hz
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Cable length
2 m
Detection range max.
5 ... 150 mm
Opening angle
approx. 3 °
Min. cycle time
2.3 ms
Response time
1 ms
Housing height
37.1 mm
Reference target
standard white, 100 mm x 100 mm
Diagnostic Coverage (DC)
0 %
Device profile
Smart Sensor
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
Detection range min.
5 ... 25 mm
Mission Time (TM)
20 a
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Compatible master port type
A
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Black-white difference (6 %/90 %)
< 5 % at 150 mm
Operating voltage
10 ... 30 V DC
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - WH: NPN normally closed / dark-on, PNP normally open / light-on
Communication interface
IEC 61131-9
Optical face
PMMA
LED risk group labelling
exempt group
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
IO-Link revision
1.1
Usage category
DC-12 and DC-13
Connection
2 m fixed cable
Light type
modulated visible red light
Control elements
Light-on/dark-on changeover switch
Interface type
IO-Link ( via C/Q = BK )
Switching voltage
max. 30 V DC
EAC conformity
TR CU 020/2011
Degree of protection
IP67 / IP69 / IP69K

OBT150-R100-2EP-IO Related Documents