OBT100-R101-EP-IO-0,3M-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Repetition rate
  approx. 13 kHz
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• No-load supply current
  < 20 mA at 24 V supply voltage
• Min. cycle time
  2.3 ms
• Response time
  300 µs
• EAC conformity
  TR CU 020/2011
• Detection range max.
  7 ... 100 mm
• Black-white difference (6 %/90 %)
  < 5 % at 80 mm
• Operating voltage
  10 ... 30 V DC
• Device profile
  Smart Sensor
• Communication interface
  IEC 61131-9
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Wave length
  680 nm
• Ripple
  max. 10 %
• Transfer rate
  COM2 (38.4 kBit/s)
• Switching frequency
  1650 Hz
• Housing
  PC (Polycarbonate)
• Reference target
  standard white, 100 mm x 100 mm
• Beam divergence
  > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Mission Time (TM)
20 a
Protection class
III
Switching current
max. 100 mA , resistive load
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Detection range min.
7 ... 25 mm
Diameter of the light spot
< 1 mm at a distance of 60 mm
Interface type
IO-Link ( via C/Q = pin 4 )
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link,
Switching voltage
max. 30 V DC
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Housing depth
18.3 mm
Mass
approx. 17 g
Optical face
PMMA
Light source
laser diode
Pulse length
3 µs
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Compatible master port type
A
Usage category
DC-12 and DC-13
Housing height
33.8 mm
Adjustment range
25 ... 100 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Process data width
Process data input 1 Bit, Process data output 2 Bit
Voltage drop
≤ 1.5 V DC
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Light type
modulated visible red light
max. pulse energy
10.4 nJ
Control elements
Light-on/dark-on changeover switch
Device ID
0x110603 (1115651)
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Laser safety
EN 60825-1:2014
Degree of protection
IP67 / IP69 / IP69K
Connection
300 mm fixed cable with M8 x 1, 3-pin connector
Laser class
1
MTTFd
560 a
IO-Link revision
1.1
Detection range
7 ... 100 mm
Opening angle
approx. 0.3 °
Diagnostic Coverage (DC)
0 %
SIO mode support
yes
Product standard
EN 60947-5-2
Housing width
13.9 mm

OBT100-R101-EP-IO-0,3M-V3-L Related Documents