OBT100-R101-2EP-IO-V31-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range max.
  7 ... 100 mm
• Diameter of the light spot
  < 1 mm at a distance of 60 mm
• Operating voltage
  10 ... 30 V DC
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Detection range min.
  7 ... 25 mm
• Black-white difference (6 %/90 %)
  < 5 % at 80 mm
• No-load supply current
  < 20 mA at 24 V supply voltage
• Min. cycle time
  2.3 ms
• Product standard
  EN 60947-5-2
• Degree of protection
  IP67 / IP69 / IP69K
• Adjustment range
  25 ... 100 mm
• Opening angle
  approx. 0.3 °
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Switching frequency
  1650 Hz
• Housing
  PC (Polycarbonate)
• Light source
  laser diode
• Repetition rate
  approx. 13 kHz
• Device profile
  Smart Sensor
Switching voltage
max. 30 V DC
Laser safety
EN 60825-1:2014
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Detection range
7 ... 100 mm
Wave length
680 nm
Diagnostic Coverage (DC)
0 %
SIO mode support
yes
Transfer rate
COM2 (38.4 kBit/s)
Response time
300 µs
Connection
M8 x 1 connector, 4-pin
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Mission Time (TM)
20 a
Control elements
Light-on/dark-on changeover switch
Voltage drop
≤ 1.5 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Mass
approx. 10 g
Laser class
1
Pulse length
3 µs
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Interface type
IO-Link ( via C/Q = pin 4 )
Switching current
max. 100 mA , resistive load
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Optical face
PMMA
Reference target
standard white, 100 mm x 100 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Protection class
III
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Housing height
41.4 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
max. pulse energy
10.4 nJ
Ripple
max. 10 %
IO-Link revision
1.1
Communication interface
IEC 61131-9
Housing width
13.9 mm
Light type
modulated visible red light
MTTFd
560 a
Device ID
0x110603 (1115651)
Compatible master port type
A
Usage category
DC-12 and DC-13
Housing depth
18.3 mm

OBT100-R101-2EP-IO-V31-L Related Documents