OBT100-R101-2EP-IO-1T-L Pepperl + Fuchs Electronic Components

Product Details

• Light source
  laser diode
• Function indicator
  LED yellow: constantly on - background detected (object not detected), constantly off - object detected
• Device ID
  0x110703 (1115907)
• Switching current
  max. 100 mA , resistive load
• EAC conformity
  TR CU 020/2011
• Housing
  PC (Polycarbonate)
• Wave length
  680 nm
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• Protection class
  III
• Compatible master port type
  A
• Product standard
  EN 60947-5-2
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Cable length
  2 m
• Detection range max.
  7 ... 100 mm
• Mission Time (TM)
  20 a
• Transfer rate
  COM2 (38.4 kBit/s)
• Switching voltage
  max. 30 V DC
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Optical face
  PMMA
• Detection range
  7 ... 100 mm
Repetition rate
approx. 13 kHz
MTTFd
560 a
Interface type
IO-Link ( via C/Q = BK )
Voltage drop
≤ 1.5 V DC
Connection
2 m fixed cable
Light type
modulated visible red light
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Ripple
max. 10 %
IO-Link revision
1.1
Switching frequency
1650 Hz
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Detection range min.
7 ... 25 mm
Diameter of the light spot
< 1 mm at a distance of 60 mm
No-load supply current
< 20 mA at 24 V supply voltage
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Housing width
13.9 mm
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Pulse length
3 µs
Diagnostic Coverage (DC)
0 %
Min. cycle time
2.3 ms
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - BK: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link, /Q - WH: NPN normally closed / light-on, PNP normally open / dark-on
Laser safety
EN 60825-1:2014
Housing height
33.8 mm
Laser class
1
Black-white difference (6 %/90 %)
< 5 % at 150 mm
Operating voltage
10 ... 30 V DC
Device profile
Smart Sensor
Response time
300 µs
Degree of protection
IP67 / IP69 / IP69K
Reference target
standard white, 100 mm x 100 mm
max. pulse energy
10.4 nJ
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
Usage category
DC-12 and DC-13
Housing depth
18.3 mm
Adjustment range
25 ... 100 mm
Opening angle
approx. 0.3 °
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
SIO mode support
yes
Communication interface
IEC 61131-9
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Mass
approx. 36 g

OBT100-R101-2EP-IO-1T-L Related Documents