OBT100-R101-2EP-IO-1T-L-Y0245 Pepperl + Fuchs Electronic Components

Product Details

• Detection range max.
  7 ... 100 mm
• max. pulse energy
  10.4 nJ
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Protection class
  III
• Switching type
  The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
• Laser safety
  IEC 60825-1:2007
• Housing height
  33.8 mm
• Laser class
  1
• Opening angle
  approx. 0.3 °
• Function indicator
  LED yellow: constantly on - background detected (object not detected), constantly off - object detected
• SIO mode support
  yes
• Product standard
  EN 60947-5-2
• Optical face
  PMMA
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Mission Time (TM)
  20 a
• Device ID
  0x110703 (1115907)
• Switching frequency
  1650 Hz
• Housing width
  13.9 mm
• Adjustment range
  25 ... 100 mm
• Black-white difference (6 %/90 %)
  < 5 % at 150 mm
Control elements
Light-on/dark-on changeover switch
Transfer rate
COM2 (38.4 kBit/s)
Voltage drop
≤ 1.5 V DC
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Cable length
0.3 m
Light type
modulated visible red light
Pulse length
3 µs
MTTFd
560 a
Min. cycle time
2.3 ms
Communication interface
IEC 61131-9
Degree of protection
IP67 / IP69 / IP69K
Detection range
7 ... 100 mm
Wave length
680 nm
Diagnostic Coverage (DC)
0 %
Interface type
IO-Link ( via C/Q = pin 4 )
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
EAC conformity
TR CU 020/2011
Housing
PC (Polycarbonate)
Detection range min.
7 ... 25 mm
Operating voltage
10 ... 30 V DC
IO-Link revision
1.1
Response time
300 µs
Housing depth
18.3 mm
Reference target
standard white, 100 mm x 100 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Device profile
Smart Sensor
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Light source
laser diode
Diameter of the light spot
< 1 mm at a distance of 60 mm
No-load supply current
< 20 mA at 24 V supply voltage
Process data width
Process data input 1 Bit, Process data output 2 Bit
Usage category
DC-12 and DC-13
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Repetition rate
approx. 13 kHz
Ripple
max. 10 %
Compatible master port type
A
Switching current
max. 100 mA , resistive load
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Mass
approx. 17 g

OBT100-R101-2EP-IO-1T-L-Y0245 Related Documents