OBT100-R101-2EP-IO-1T-L-Y0244 Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  standard white, 100 mm x 100 mm
• Light source
  laser diode
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• Diagnostic Coverage (DC)
  0 %
• IO-Link revision
  1.1
• Product standard
  EN 60947-5-2
• Housing depth
  18.3 mm
• Light type
  modulated visible red light
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Opening angle
  approx. 0.3 °
• Function indicator
  LED yellow: constantly on - background detected (object not detected), constantly off - object detected
• SIO mode support
  yes
• Switching current
  max. 100 mA , resistive load
• Detection range min.
  7 ... 25 mm
• Beam divergence
  > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
• Operating voltage
  10 ... 30 V DC
• Device profile
  Smart Sensor
• Response time
  300 µs
• Black-white difference (6 %/90 %)
  < 5 % at 150 mm
• Control elements
  Light-on/dark-on changeover switch
Device ID
0x110703 (1115907)
Voltage drop
≤ 1.5 V DC
Housing height
33.8 mm
max. pulse energy
10.4 nJ
Pulse length
3 µs
Ripple
max. 10 %
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
approx. 17 g
No-load supply current
< 20 mA at 24 V supply voltage
Transfer rate
COM2 (38.4 kBit/s)
Usage category
DC-12 and DC-13
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Mission Time (TM)
20 a
Min. cycle time
2.3 ms
Switching voltage
max. 30 V DC
Housing width
13.9 mm
Housing
PC (Polycarbonate)
EAC conformity
TR CU 020/2011
Optical face
PMMA
Degree of protection
IP67 / IP69 / IP69K
Laser class
1
Wave length
680 nm
Interface type
IO-Link ( via C/Q = pin 4 )
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Communication interface
IEC 61131-9
Connection
fixed cable 300 mm with M8 x 1 male connector; 4-pin
Detection range
7 ... 100 mm
MTTFd
560 a
Detection range max.
7 ... 100 mm
Diameter of the light spot
< 1 mm at a distance of 60 mm
Protection class
III
Compatible master port type
A
Laser safety
IEC 60825-1:2007
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Adjustment range
25 ... 100 mm
Repetition rate
approx. 13 kHz
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Process data width
Process data input 1 Bit, Process data output 2 Bit
Switching frequency
1650 Hz
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Cable length
0.3 m

OBT100-R101-2EP-IO-1T-L-Y0244 Related Documents