OBT100-R100-EP-IO-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range min.
  7 ... 25 mm
• Repetition rate
  approx. 13 kHz
• Control elements
  Light-on/dark-on changeover switch
• Compatible master port type
  A
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Degree of protection
  IP67 / IP69 / IP69K
• Light source
  laser diode
• max. pulse energy
  10.4 nJ
• Pulse length
  3 µs
• Protection class
  III
• Signal output
  1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Light type
  modulated visible red light
• Mission Time (TM)
  20 a
• IO-Link revision
  1.1
• Min. cycle time
  2.3 ms
• Voltage drop
  ≤ 1.5 V DC
• Mass
  approx. 10 g
• Housing
  PC (Polycarbonate)
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
MTTFd
560 a
Device profile
Smart Sensor
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link,
Housing width
11 mm
Detection range max.
7 ... 100 mm
Black-white difference (6 %/90 %)
< 5 % at 80 mm
Ripple
max. 10 %
Device ID
0x110603 (1115651)
Product standard
EN 60947-5-2
Laser class
1
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Transfer rate
COM2 (38.4 kBit/s)
EAC conformity
TR CU 020/2011
Response time
300 µs
Housing height
44.5 mm
Reference target
standard white, 100 mm x 100 mm
Diameter of the light spot
< 1 mm at a distance of 60 mm
No-load supply current
< 20 mA at 24 V supply voltage
Process data width
Process data input 1 Bit, Process data output 2 Bit
Communication interface
IEC 61131-9
Switching frequency
1650 Hz
Housing depth
21.5 mm
Adjustment range
25 ... 100 mm
Diagnostic Coverage (DC)
0 %
Interface type
IO-Link ( via C/Q = pin 4 )
Switching current
max. 100 mA , resistive load
Optical face
PMMA
Detection range
7 ... 100 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Switching voltage
max. 30 V DC
Usage category
DC-12 and DC-13
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Connection
M8 x 1 connector, 3-pin
Wave length
680 nm
Opening angle
approx. 0.3 °
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Laser safety
EN 60825-1:2014
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),

OBT100-R100-EP-IO-V3-L Related Documents