OBT100-R100-2EP-IO-V31-L Pepperl + Fuchs Electronic Components

Product Details

• Detection range max.
  7 ... 100 mm
• Black-white difference (6 %/90 %)
  < 5 % at 80 mm
• Control elements
  Light-on/dark-on changeover switch
• Min. cycle time
  2.3 ms
• Switching frequency
  1650 Hz
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Laser class
  1
• Repetition rate
  approx. 13 kHz
• Adjustment range
  25 ... 100 mm
• Beam divergence
  > 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
• Mission Time (TM)
  20 a
• Device profile
  Smart Sensor
• SIO mode support
  yes
• Housing depth
  21.5 mm
• Detection range min.
  7 ... 25 mm
• Opening angle
  approx. 0.3 °
• Protection class
  III
• Usage category
  DC-12 and DC-13
• EAC conformity
  TR CU 020/2011
• Connection
  M8 x 1 connector, 4-pin
Light type
modulated visible red light
MTTFd
560 a
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Ripple
max. 10 %
Transfer rate
COM2 (38.4 kBit/s)
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Voltage drop
≤ 1.5 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F),
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Housing height
44.5 mm
Wave length
680 nm
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
IO-Link revision
1.1
Compatible master port type
A
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Housing width
11 mm
Detection range
7 ... 100 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Interface type
IO-Link ( via C/Q = pin 4 )
Switching voltage
max. 30 V DC
Response time
300 µs
Optical face
PMMA
Light source
laser diode
Diameter of the light spot
< 1 mm at a distance of 60 mm
No-load supply current
< 20 mA at 24 V supply voltage
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interface
IEC 61131-9
Housing
PC (Polycarbonate)
Reference target
standard white, 100 mm x 100 mm
max. pulse energy
10.4 nJ
Operating voltage
10 ... 30 V DC
Process data width
Process data input 1 Bit, Process data output 2 Bit
Laser safety
EN 60825-1:2014
Mass
approx. 10 g
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Pulse length
3 µs
Diagnostic Coverage (DC)
0 %
Device ID
0x110603 (1115651)
Switching current
max. 100 mA , resistive load
Product standard
EN 60947-5-2
Degree of protection
IP67 / IP69 / IP69K

OBT100-R100-2EP-IO-V31-L Related Documents