OBT100-R100-2EP-IO-0,3M-V31-L Pepperl + Fuchs Electronic Components

Product Details

• Reference target
  standard white, 100 mm x 100 mm
• Black-white difference (6 %/90 %)
  < 5 % at 80 mm
• Operating voltage
  10 ... 30 V DC
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
• Connection
  fixed cable 300 mm with M8 x 1 male connector; 4-pin
• Adjustment range
  25 ... 100 mm
• Diameter of the light spot
  < 1 mm at a distance of 60 mm
• Ripple
  max. 10 %
• Device profile
  Smart Sensor
• Switching current
  max. 100 mA , resistive load
• Laser safety
  EN 60825-1:2014
• Cable length
  0.3 m
• Wave length
  680 nm
• Mission Time (TM)
  20 a
• Protection class
  III
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• Communication interface
  IEC 61131-9
• Housing height
  37.1 mm
• Detection range
  7 ... 100 mm
Repetition rate
approx. 13 kHz
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
SIO mode support
yes
Response time
300 µs
Housing width
11 mm
Detection range max.
7 ... 100 mm
Pulse length
3 µs
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
IO-Link revision
1.1
Compatible master port type
A
Switching frequency
1650 Hz
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Diagnostic Coverage (DC)
0 %
Device ID
0x110603 (1115651)
Voltage drop
≤ 1.5 V DC
EAC conformity
TR CU 020/2011
Housing
PC (Polycarbonate)
Laser class
1
max. pulse energy
10.4 nJ
No-load supply current
< 20 mA at 24 V supply voltage
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Optical face
PMMA
Detection range min.
7 ... 25 mm
MTTFd
560 a
Interface type
IO-Link ( via C/Q = pin 4 )
Min. cycle time
2.3 ms
Product standard
EN 60947-5-2
Degree of protection
IP67 / IP69 / IP69K
Light source
laser diode
Opening angle
approx. 0.3 °
Control elements
Light-on/dark-on changeover switch
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Usage category
DC-12 and DC-13
Housing depth
21.5 mm
Light type
modulated visible red light
Ambient light limit
EN 60947-5-2 : 40000 Lux
Transfer rate
COM2 (38.4 kBit/s)
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Mass
approx. 17 g

OBT100-R100-2EP-IO-0,3M-V31-L Related Documents