OBT100-R100-2EP-IO-0,3M-V1-L Pepperl + Fuchs Electronic Components

Product Details

• Light type
  modulated visible red light
• Diameter of the light spot
  < 1 mm at a distance of 60 mm
• Interface type
  IO-Link ( via C/Q = pin 4 )
• Detection range min.
  7 ... 25 mm
• Black-white difference (6 %/90 %)
  < 5 % at 80 mm
• Adjustment range
  25 ... 100 mm
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• Protection class
  III
• Laser class
  1
• max. pulse energy
  10.4 nJ
• No-load supply current
  < 20 mA at 24 V supply voltage
• Compatible master port type
  A
• Communication interface
  IEC 61131-9
• Degree of protection
  IP67 / IP69 / IP69K
• Note
  LASER LIGHT , DO NOT STARE INTO BEAM
• Wave length
  680 nm
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Device ID
  0x110603 (1115651)
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
• FDA approval
  IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Housing
PC (Polycarbonate)
Detection range max.
7 ... 100 mm
Opening angle
approx. 0.3 °
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Switching voltage
max. 30 V DC
EAC conformity
TR CU 020/2011
Mass
approx. 17 g
Light source
laser diode
Repetition rate
approx. 13 kHz
Mission Time (TM)
20 a
Transfer rate
COM2 (38.4 kBit/s)
Usage category
DC-12 and DC-13
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Reference target
standard white, 100 mm x 100 mm
MTTFd
560 a
Control elements
Light-on/dark-on changeover switch
Process data width
Process data input 1 Bit, Process data output 2 Bit
Product standard
EN 60947-5-2
Optical face
PMMA
Detection range
7 ... 100 mm
Pulse length
3 µs
Diagnostic Coverage (DC)
0 %
Device profile
Smart Sensor
SIO mode support
yes
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link, /Q - Pin2: NPN normally closed / dark-on, PNP normally open / light-on
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Operating voltage
10 ... 30 V DC
IO-Link revision
1.1
Response time
300 µs
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing height
37.1 mm
Ripple
max. 10 %
Min. cycle time
2.3 ms
Switching frequency
1650 Hz
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Cable length
0.3 m
Switching current
max. 100 mA , resistive load
Laser safety
EN 60825-1:2014
Housing width
11 mm
Voltage drop
≤ 1.5 V DC
Housing depth
21.5 mm

OBT100-R100-2EP-IO-0,3M-V1-L Related Documents