ZS 235-11Z-M20 Schmersal Electronic Components

Product Details

• Actuating element
  Plunger
• Material of the contacts, electrical
  Silver
• Ambient temperature, maximum
  +80 °C
• Switching principle
  Snap switch element
• Cable section, minimum
  0.75 mm²
• Utilisation category AC-15
  4 A
• Enclosure material
  Zinc die-cast, paint finish
• Actuating force, minimum
  9 N
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Thermal test current
  10 A
• Safety functions
  Yes
• Note Bounce duration
  Bounce duration in accordance with actuating speed
• Ambient temperature, minimum
  -30 °C
• Switching element
  NO contact, NC contact
• Number of safety contacts
  1
• Actuating speed, maximum
  1 m/s
• Degree of protection
  IP65 to EN 60529, IP67 to EN 60529
• Rated insulation voltage Ui
  250 V
• Number of auxiliary contacts
  1
• Note (Switchover time)
  Switchover time in accordance with actuating speed
Height of sensor
75.5 mm
Housing construction form
Norm construction design
Actuating speed, minimum
10 mm/min
Width of sensor
30 mm
Mechanical life, minimum
20,000,000 Operations
Length of sensor
30 mm
Required rated short-circuit current to EN 60947-5-1
1,000 A
Switching frequency
5,000 /h
Standards
IEC 60947-5-1, EN ISO 13849-1, BG-GS-ET-15
Gross weight
149 g
Terminal Connector
Screw terminals M20 x 1.5
Rated impulse withstand voltage Uimp
6 kV
Bounce duration, maximum
3 ms
Actuator type to DIN EN 50047
B
Positive break force, minimum
19 N
Cable section, maximum
2.5 mm²
Switchover time, minimum
5.5 ms
Utilisation category DC-13
1 A

ZS 235-11Z-M20 Related Documents