TR 452-20Y Schmersal Electronic Components

Product Details

• Switching principle
  Creep circuit element
• Note (Switching element)
  with double break
• Switching element
  Normally open contact (NO)
• Utilisation category AC-15
  4 A
• Thermal test current
  16 A
• Rated impulse withstand voltage Uimp
  6 kV
• Rated insulation voltage Ui
  400 V
• Ambient temperature, minimum
  -30 °C
• Ambient temperature, maximum
  +90 °C
• Degree of protection
  IP65 to EN 60529
• Diameter of Castor
  25 mm
• Width of Castor
  6.5 mm
• Height of sensor
  173 mm
• Note (Actuating speed)
  Actuating speed with vertical actuating angle to switch axis
• Width of sensor
  118 mm
• Wire cross-section
  13 AWG
• Length of sensor
  64 mm
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Cable section, maximum
  2.5 mm²
• Cable section, minimum
  1.5 mm²
Terminal Connector
Screw connection
Actuating speed, maximum
0.5 m/s
Actuating speed, minimum
1 mm/min
Actuating angle, from right of switch axis
30 °
Contact opening
2 x 6 mm
Mechanical life, minimum
10,000,000 Operations
Actuating angle, from left of switch axis
30 °
Actuating element
Roller plunger
Active principle
mechanical
Gross weight
1,600 g
Slide form
Castor
Enclosure coating material
painted
Standards
EN 60947-5-1
Material of the contacts, electrical
Silver
Roller material
Plastic
Number of shutters
2
Enclosure material
Grey cast iron, galvanised

TR 452-20Y Related Documents