MV3H 017-22Y Schmersal Electronic Components

Product Details

• Active principle
  mechanical
• Mechanical life, minimum
  5,000,000 Operations
• Actuating speed, minimum
  1 mm/min
• Wire cross-section
  13 AWG
• Ambient temperature, maximum
  +90 °C
• Slide form
  Castor
• Roller material
  Plastic
• Actuating angle, from right of switch axis
  30 °
• Degree of protection
  IP65 to EN 60529
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Material of the contacts, electrical
  Silver
• Number of openers
  2
• Note (Actuating speed)
  Actuating speed with vertical actuating angle to switch axis
• Gross weight
  525 g
• Standards
  EN 60947-5-1
• Cable section, maximum
  2.5 mm²
• Enclosure material
  Light-alloy diecast, paint finish
• Actuating angle, from left of switch axis
  30 °
• Actuating torque
  0.2 Nm
• Width of Castor
  8 mm
Actuating element
Roller lever
Contact opening
2 x 1.2 mm
Terminal Connector
Screw connection
Ambient temperature, minimum
-30 °C
Switching principle
Snap switch element
Number of shutters
2
Cable section, minimum
1.5 mm²
Diameter of Castor
36 mm
Utilisation category AC-15
400 VAC
Enclosure coating material
painted
Actuating speed, maximum
3 m/s
Thermal test current
10 A
Rated insulation voltage Ui
500 V
Bounce duration, maximum
2.5 ms
Length of sensor
43 mm
Switchover time, maximum
40 ms
Width of sensor
67 mm
Switching element
NO contact, NC contact
Height of sensor
226 mm
Note (Switching element)
galvanically separated contact bridges

MV3H 017-22Y Related Documents