MV10H 330-11Y-M20 Schmersal Electronic Components

Product Details

• Material of the rod
  Epoxy resin
• Gross weight
  315 g
• Length of sensor
  40 mm
• Ambient temperature, minimum
  -30 °C
• Actuating speed, minimum
  1 mm/min
• Contact opening
  2 x 0.5 mm
• Width of sensor
  40 mm
• Ambient temperature, maximum
  +90 °C
• Bounce duration, maximum
  43,221 ms
• Enclosure material
  Light-alloy diecast, paint finish
• Cable section, maximum
  2.5 mm²
• Height of sensor
  276 mm
• Rated insulation voltage Ui
  250 V
• Number of openers
  1
• Standards
  EN 60947-5-1
• Number of shutters
  1
• Wire cross-section
  13 AWG
• Thermal test current
  6 A
• Note (Switching element)
  galvanically separated contact bridges
• Active principle
  mechanical
Terminal Connector
Screw connection
Degree of protection
IP65 to EN 60529
Switching element
NO contact, NC contact
Switchover time, maximum
10 ms
Mechanical life, minimum
30,000,000 Operations
Repeat accuracy of switching points
0.02
Cable section, minimum
1.5 mm²
Rated impulse withstand voltage Uimp
4 kV
Actuating element
Rod lever
Actuating torque
0.5 Nm
Restistance to shock
50 g / 6 ms
Utilisation category AC-15
2.5 A
Enclosure coating material
painted
Material of the contacts, electrical
Silver
Note (Cable section)
All indications about the cable section are including the conductor ferrules.
Diameter of the Rod
6 mm
Switching principle
Snap switch element

MV10H 330-11Y-M20 Related Documents