M2K 017-22Y Schmersal Electronic Components

Product Details

• Roller material
  Plastic
• Actuating force
  5.5 N
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Rated insulation voltage Ui
  500 V
• Bounce duration, maximum
  2.5 ms
• Standards
  EN 60947-5-1
• Actuating angle, from left of switch axis
  45 °
• Terminal Connector
  Screw connection
• Diameter of Castor
  20 mm
• Enclosure coating material
  painted
• Mechanical life, minimum
  5,000,000 Operations
• Cable section, minimum
  1.5 mm²
• Length of sensor
  43 mm
• Ambient temperature, maximum
  +90 °C
• Switchover time, maximum
  40 ms
• Slide form
  Castor
• Actuating speed, maximum
  0.5 m/s
• Contact opening
  2 x 1.2 mm
• Width of Castor
  8.5 mm
• Switching element
  NO contact, NC contact
Enclosure material
Light-alloy diecast, paint finish
Actuating element
Tilt lever
Cable section, maximum
2.5 mm²
Degree of protection
IP65 to EN 60529
Note (Switching element)
galvanically separated contact bridges
Number of shutters
2
Gross weight
405 g
Actuating angle, from right of switch axis
60 °
Wire cross-section
13 AWG
Thermal test current
10 A
Material of the contacts, electrical
Silver
Active principle
mechanical
Note (Actuating speed)
Actuating speed with vertical actuating angle to switch axis
Width of sensor
67 mm
Number of openers
2
Actuating speed, minimum
1 mm/min
Height of sensor
185 mm
Ambient temperature, minimum
-30 °C
Switching principle
Snap switch element
Utilisation category AC-15
400 VAC

M2K 017-22Y Related Documents