M2A 471-21/21Y Schmersal Electronic Components

Product Details

• Gross weight
  5,565 g
• Actuating angle, from right of switch axis
  30 °
• Active principle
  mechanical
• Terminal Connector
  Screw connection
• Degree of protection
  IP65 to EN 60529
• Number of NC, left
  1
• Contact opening
  2 x 4 mm
• Height of sensor
  163 mm
• Switching element
  NO contact / NC contact
• Number of NO, right
  2
• Roller material
  Plastic
• Note (Actuating speed)
  Actuating speed with vertical actuating angle to switch axis
• Width of sensor
  194 mm
• Rated insulation voltage Ui
  500 V
• Enclosure coating material
  painted
• Material of the contacts, electrical
  Silver
• Actuation direction
  each time 60° right-hand side and left-hand side rotation
• Note (Cable section)
  All indications about the cable section are including the conductor ferrules.
• Ambient temperature, maximum
  +90 °C
• Actuating angle, from left of switch axis
  30 °
Slide form
Castor
Cable section, maximum
4 mm²
Ambient temperature, minimum
-30 °C
Number of NC, right
1
Actuating element
Roller lever
Cable section, minimum
1.5 mm²
Width of Castor
9 mm
Thermal test current
25 A
Standards
EN 60947-5-1
Mechanical life, minimum
30,000 Operations
Actuating speed, maximum
3 m/s
Length of sensor
190 mm
Rated impulse withstand voltage Uimp
6 kV
Switching frequency
1,000 /h
Enclosure material
Grey cast iron, galvanised
Number of NO, left
2
Actuating speed, minimum
0.1 mm/min
Wire cross-section
11 AWG
Diameter of Castor
36 mm
Note (Switching element)
galvanically separated contact bridges
Switching principle
Snap switch element
Utilisation category AC-15
10 A

M2A 471-21/21Y Related Documents