FWS 2105 C UE: 24...230V AC/DC Schmersal Electronic Components

Product Details

• Standards
  IEC/EN 60204-1, BG-GS-ET-20, EN ISO 13849-1
• Wire breakage detection
  Yes
• Mechanical life, minimum
  20,000,000 Operations
• Tightening torque of Clips
  0.6 Nm
• Degree of protection of clips or terminals
  IP20
• Climatic stress
  EN 60068-2-3, BG-GS-ET-14
• Automatic reset function
  Yes
• Mounting
  Snaps onto standard DIN rail to EN 60715
• Number of safety contacts
  1
• Contact resistance, maximum
  0.1 Ω
• Switching capacity, maximum
  250 VAC
• Material of the contacts, electrical
  Ag-Ni + Au
• Enclosure material
  Glass-fibre reinforced thermoplastic, ventilated
• Number of LEDs
  1
• Terminal Connector
  Screw connection, rigid or flexible
• Cable section, maximum
  2.5 mm²
• Degree of protection of the enclosure
  IP40
• Stop-Category
  0
• Integral System Diagnostics, status
  Yes
• Number of signalling outputs
  2
Terminal designations
IEC/EN 60947-1
Depth
121 mm
Rated impulse withstand voltage Uimp
4.8 kV
Resistance to vibrations to EN 60068-2-6
10 ... 55 Hz, Amplitude 0.35 mm
Current, Utilisation category DC13
2 A
Restistance to shock
30 g / 11 ms
Electrical power consumption, maximum
5 W
Height
100 mm
Storage and transport temperature, maximum
+70 °C
Rated operating voltage
24 ... 230 VAC/DC
Input signal, HIGH Signal 1
10 … 30 VDC
Conduction resistance, maximum
40 Ω
Number of undelayed semi-conductor outputs with signaling function
2
Degree of protection of the mounting space
IP54
Overvoltage category
III
Rated control voltage at DC, maximum
253 VDC
Current, Utilisation category AC-15
3 A
Input signal, LOW Signal 0
0 … 2 VDC
Rated control voltage at AC 60 Hz, maximum
253 VAC
Width
45 mm
Storage and transport temperature, minimum
-25 °C
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Voltage, Utilisation category AC15
230 VAC
EMC rating
10 V/m
Gross weight
282 g
Cable section, minimum
0.2 mm²
Ambient temperature, minimum
+0 °C
Degree of pollution to VDE 0110
2
Note (Contact resistance)
in new state
Rated AC voltage for controls, 50 Hz, minimum
20.4 VAC
Voltage, Utilisation category DC13
24 VDC
Ambient temperature, maximum
+55 °C
Rated control voltage at AC 50 Hz, maximum
253 VAC
Switching capacity, minimum
10 VDC
Reset after disconnection of supply voltage
Yes
Rated AC voltage for controls at DC minimum
20.4 VDC

FWS 2105 C UE: 24...230V AC/DC Related Documents