FWS 1206 C Schmersal Electronic Components

Product Details

• Reset edge detection
  Yes
• Terminal Connector
  Screw connection, rigid or flexible
• Height
  100 mm
• Rated impulse withstand voltage Uimp
  4.8 kV
• Electrical power consumption, maximum
  5 W
• Rated control voltage at DC, maximum
  28.8 VDC
• Material of the contacts, electrical
  Ag-Ni 10 and 0.2 µm gold-plated
• Number of signalling outputs
  2
• Depth
  121 mm
• Degree of pollution to VDE 0110
  3
• Rated control voltage at AC 60 Hz, maximum
  26.4 VAC
• Input signal, HIGH Signal 1
  10 … 30 VDC
• Integral System Diagnostics, status
  Yes
• Degree of protection of the enclosure
  IP40
• Storage and transport temperature, minimum
  -25 °C
• Rated AC voltage for controls, 50 Hz, minimum
  20.4 VAC
• Current, Utilisation category AC-15
  3 A
• Switching capacity, minimum
  10 mA
• EMC rating
  10 V/m
• Climatic stress
  EN 60068-2-3, BG-GS-ET-14
Number of LEDs
1
Restistance to shock
30 g / 11 ms
Current, Utilisation category DC13
2 A
Wire breakage detection
Yes
Terminal designations
IEC/EN 60947-1
Cable section, maximum
2.5 mm²
Degree of protection of the mounting space
IP54
Thermal test current
6 A
Rated AC voltage for controls, 60 Hz, minimum
20.4 VAC
Switching capacity, maximum
2 A
Stop-Category
0
Number of undelayed semi-conductor outputs with signaling function
2
Cable section, minimum
0.2 mm²
Width
22.5 mm
Storage and transport temperature, maximum
+70 °C
Rated control voltage at AC 50 Hz, maximum
26.4 VAC
Voltage, Utilisation category DC13
24 VDC
Conduction resistance, maximum
40 Ω
Enclosure material
Glass-fibre reinforced thermoplastic, ventilated
Earth connection detection
Yes
Mechanical life, minimum
20,000,000 Operations
Degree of protection of clips or terminals
IP20
Overvoltage category
II
Note (Contact resistance)
in new state
Standards
IEC/EN 60204-1, BG-GS-ET-20, EN ISO 13849-1
Gross weight
200 g
Mounting
Snaps onto standard DIN rail to EN 60715
Ambient temperature, maximum
+55 °C
Rated operating voltage
24 VDC ± 15 %
Rated AC voltage for controls at DC minimum
20.4 VDC
Contact resistance, maximum
0.1 Ω
Input signal, LOW Signal 0
0 … 2 VDC
Feedback circuit
Yes
Number of safety contacts
2
Tightening torque of Clips
0.6 Nm
Ambient temperature, minimum
+0 °C
Resistance to vibrations to EN 60068-2-6
10 ... 55 Hz, Amplitude 0.35 mm
Voltage, Utilisation category AC15
230 VAC

FWS 1206 C Related Documents