CSS 12-34-V-D-M-ST Schmersal Electronic Components

Product Details

• Gross weight
  140 g
• Short circuit detection
  Yes
• Actuating panels
  Actuation from top
• Terminal Connector
  Connector plug M12, 8-pole
• Ambient temperature, maximum
  +70 °C
• Protection rating
  II
• Versions
  p-type
• Current, Utilisation category DC13
  0.05 A
• Sensor topology
  Sensor for series wiring
• Reaction time, maximum
  30 ms
• Cascadable
  Yes
• Integral System Diagnostics, status
  Yes
• Duration of risk, maximum
  60 ms
• Hysteresis (Switch distance), maximum
  1.5 mm
• Actuator switch distance
  Actuator CST 34-V-1: 12 mm, Actuator CST 34-S-2: 10 mm, Actuator CST 34-S-3: 15 mm
• Note
  The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
• Length of sensor
  35 mm
• Restistance to shock
  30 g / 11 ms
• Rated operating current (safety outputs)
  250 mA
• Current, Utilisation category DC12
  0.05 A
EMC rating
IEC 61000-6-2
Current leakage Ir
0.5 mA
Switching frequency, approx.
3 Hz
Housing construction form
Block
Diagnostic output
Yes
Number of fail-safe digital outputs
2
Ensured switch distance ON Sao
10 mm, 13 mm, 8 mm
Width of sensor
27 mm
Storage and transport temperature, minimum
-25 °C
No-load supply current I0
100 mA
Output current, (fail-safe output), maximum
0.25 A
Voltage drop Ud, maximum
5 V
Active principle
inductive
Safety functions
Yes
Repeat accuracy R R
0.5 mm
Height of sensor
108.2 mm
Degree of pollution to VDE 0100
3
Operating current
600 mA
Voltage, Utilisation category DC13
24 VDC
Enclosure material
Glass-fibre, reinforced thermoplastic
Short-circuit recognition
Yes
Number of Series-wiring of sensors
31
Switch distance
10 mm, 12 mm, 15 mm
Ambient temperature, minimum
-25 °C
Rated insulation voltage Ui
32 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Number of semi-conductor outputs with signaling function
1
Active area
front side
Note (Repeat accuracy R)
Axial offset: the front face allows for an axial misalignment (z) of max. ± 8 mm (see figure: operating principle).
Storage and transport temperature, maximum
+85 °C
Voltage type
DC (direct current)
Installation conditions (mechanical)
not flush
Standards
IEC 60947-5-3
Number of LEDs
3
Ensured switch distance OFF Sar
15 mm, 16 mm, 18 mm
Degree of protection
IP65 to EN 60529, IP67 to EN 60529
Overvoltage category
III
Rated impulse withstand voltage Uimp
0.8 kV
Voltage, Utilisation category DC12
24 VDC
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Interfering radiation
IEC 61000-6-4

CSS 12-34-V-D-M-ST Related Documents