CSS 11-30S-D-M-ST Schmersal Electronic Components

Product Details

• ISO thread of the sensor
  M30
• Short-circuit recognition
  Yes
• Number of Series-wiring of sensors
  31
• Duration of risk, maximum
  60 ms
• Rated insulation voltage Ui
  32 VAC/DC
• Required rated short-circuit current to EN 60947-5-1
  100 A
• Voltage drop Ud, maximum
  5 V
• Voltage, Utilisation category DC13
  24 VDC
• Short circuit detection
  Yes
• Reaction time, maximum
  60 ms
• Hysteresis (Switch distance), maximum
  2 mm
• Storage and transport temperature, minimum
  -25 °C
• Rated operating voltage, maximum
  26.4 VDC
• Current leakage Ir
  0.5 mA
• Housing construction form
  Cylinder, thread
• Cascadable
  Yes
• Actuating panels
  Actuation from top
• Length of sensor
  99.5 mm
• Protection rating
  II
• Operating current
  600 mA
Versions
p-type
EMC rating
IEC 61000-6-2
Standards
IEC 61508, IEC 60947-5-3
Number of fail-safe digital outputs
2
Note
The cable section of the interconnecting cable must be observed for both wiring variants! Cable length and cable section alter the voltage drop depending on the output current
Restistance to shock
30 g / 11 ms
No-load supply current I0
100 mA
Current, Utilisation category DC12
0.05 A
Diagnostic output
Yes
Sensor topology
Sensor for series wiring
Ensured switch distance OFF Sar
15 mm
Ambient temperature, maximum
+65 °C
Degree of pollution to VDE 0100
3
Output current, (fail-safe output), maximum
0.25 A
Interfering radiation
IEC 61000-6-4
Enclosure material
Stainless steel
Integral System Diagnostics, status
Yes
Switch distance
11 mm
Ambient temperature, minimum
-25 °C
Rated impulse withstand voltage Uimp
0.8 kV
Switching frequency, approx.
3 Hz
Current, Utilisation category DC13
0.05 A
Gross weight
245 g
Number of semi-conductor outputs with signaling function
1
Active area
front side
Storage and transport temperature, maximum
+85 °C
Voltage type
DC (direct current)
Voltage, Utilisation category DC12
24 VDC
Installation conditions (mechanical)
not flush
Number of LEDs
2
Ensured switch distance ON Sao
8 mm
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Rated operating voltage, minimum
20.4 VDC
Active principle
inductive
Safety functions
Yes
Repeat accuracy R R
1 mm
Degree of protection
IP69 to EN 60529
Overvoltage category
III
Rated operating current (safety outputs)
250 mA

CSS 11-30S-D-M-ST Related Documents