AZM40B-I2-ST-1P2P-PH Schmersal Safety Switches

Product Details

• Active principle
  RFID
• Actuator monitored
  Yes
• Number of safety contacts
  2
• Terminal Connector
  Connector M12, 8-pole, A-coded
• Restistance to shock
  30 g / 11 ms
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Current leakage Ir
  0.5 mA
• Standards
  IEC 61508, EN 60947-5-3, EN ISO 13849-1
• Response time safety outputs in case of switch-off by safety inputs, maximum
  1.5 ms
• Interlocking principle
  bistable
• Ensured switch distance ON Sao
  1 mm
• Storage and transport temperature, maximum
  +85 °C
• Time to readiness, maximum
  4,000 ms
• Manual release
  Yes
• Actuating speed, maximum
  0.5 m/s
• Ambient temperature, maximum
  +55 °C
• Reaction time, maximum
  100 ms
• Short circuit detection
  Yes
• Clamping force in accordance with ISO14119 Fzh
  2,000 N
• Degree of protection
  IP66 to EN 60529, IP67 to EN 60529
Resistance to vibrations to EN 60068-2-6
10 … 55 Hz, amplitude 1 mm
Enclosure material
Glass-fibre, reinforced thermoplastic and light-alloy diecast
Integral System Diagnostics, status
Yes
Ambient temperature, minimum
+0 °C
Rated insulation voltage Ui
32 VDC
Duration of risk, maximum
200 ms
Short-circuit recognition
Yes
Type of the fixing screws
DESIGN_MOUNTING_SCREWS11111111111111111112
Height of sensor
20 mm
Voltage drop Ud, maximum
2 V
general information
Individual coding, multiple teaching
Safety functions
Yes
Latching force
40 N
Length of sensor
119.5 mm
Protection rating
III
Coding level according to ISO 14119
High
Latching
Yes
Mechanical life, minimum
200,000 Operations
Width of sensor
40 mm
Overvoltage category
III
Operating current
1,200 mA
Versions
short-circuit proof, p-type
Voltage, Utilisation category DC13
24 VDC
Gross weight
306.2 g
Series-wiring
Yes
Clamping force, maximum Fmax
2,600 N
Ensured switch distance OFF Sar
8 mm
Storage and transport temperature, minimum
-40 °C
No-load supply current I0
100 mA
Current consumption at 24V
5 mA
Current, Utilisation category DC13
0.05 A
Current, Utilisation category DC12
0.05 A
Degree of pollution to VDE 0100
3
Rated impulse withstand voltage Uimp
0.8 kV
Rated operating current (safety outputs)
250 mA
Classification ZVEI CB24I, Sink
C1, C2
Classification ZVEI CB24I, Source
C2
Current consumption solenoid at switching moment, peak
600 mA / 100ms
Rated operating voltage
24 VDC - 15 % / + 10 % (stabilised PELV)
Voltage, Utilisation category DC12
24 VDC
Note
Cable length and cable section alter the voltage drop depending on the output current
Required rated short-circuit current to EN 60947-5-1
100 A
Switching frequency, maximum
0.3 Hz

AZM40B-I2-ST-1P2P-PH Related Documents