AZM300Z-I2-ST-SD2P Schmersal Safety Switches


Part#:AZM300Z-I2-ST-SD2P
Alt. Part#:103001440
Manufacturer:Schmersal
Category:Safety Switches
Product Lifecycle:Active
Product description
AZM300Z-I2-ST-SD2P Schmersal - Solenoid interlocks; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; Connector M12, 8-pole; Power to unlock; Guard locking monitored; serial diagnostic output; Hygienic design; Protection class IP 69; Suitable
Product Details
- Standards IEC 61508, IEC 60947-5-3, EN ISO 13849-1
- Time to readiness, maximum 5,000 ms
- Guard locking monitored Yes
- Short circuit detection Yes
- Clamping force, maximum Fmax 1,500 N
- Ensured switch distance OFF Sar 20 mm
- Ambient temperature, minimum +0 °C
- Protection rating III
- No-load supply current I0 100 mA
- Switching frequency, maximum 0.5 Hz
- Gross weight 585 g
- Response time safety outputs in case of switch-off by safety inputs, maximum 1.5 ms
- Safety functions Yes
- Angular offset between interlocking device and actuator, maximum 2 °
- Latching force, adjustable, position 2 50 N
- Note (length of the sensor chain) Cable length and cross-section change the voltage drop dependiing on the output current
- Relative humidity, maximum 93 %
- general information Individual coding, multiple teaching
- Frequency band RFID 125 kHz
- Short-circuit recognition Yes
- Length of sensor chain, maximum 200 m
- Ambient temperature, maximum +60 °C
- Rated insulation voltage Ui 32 VDC
- Current leakage Ir 0.5 mA
- Coding level according to ISO 14119 High
- Note (Relative humidity) non-condensing, non-icing
- Operating voltage, minimum 20.4 VDC
- Required rated short-circuit current to EN 60947-5-1 100 A
- Voltage, Utilisation category DC13 24 VDC
- Operation current 150 mA
- Enclosure material Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
- Latching Yes
- Note (Mechanical lifetime) When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
- Ensured switch distance ON Sao 1 mm
- Length of sensor 120 mm
- Resistance to vibrations to EN 60068-2-6 10 … 150 Hz, amplitude 0.35 mm
- Notes (Power supply, general) stabilised PELV power supply
- Test pulse duration, maximum 0.5 ms
- Transmit power, maximum -6 dB/m
- Power to unlock Yes
- Mechanical life, minimum 1,000,000 Operations
- Tightening torque for the fixing screws, maximum 7 Nm
- Width of sensor 87.5 mm
- Storage and transport temperature, minimum -10 °C
- Overvoltage category III
- Current consumption with solenoid ON, peak 350 mA / 200 ms
- Classification ZVEI CB24I, Source C2
- Current, Utilisation category DC12 0.05 A
- Active principle RFID
- Serial diagnostics Yes
- Number of fail-safe digital outputs 2
- Type of the fixing screws 2x M6
- Height of sensor 35 mm
- Rated impulse withstand voltage Uimp 0.8 kV
- Switching thresholds −3 V … 5 V (Low), 15 V … 30 V (High)
- Current consumption at 24V 5 mA
- Current, Utilisation category DC13 0.05 A
- Duration of risk, maximum 200 ms
- Clamping force in accordance with ISO14119 Fzh 1,150 N
- Terminal Connector Connector M12, 8-pole, A-coded
- Zulässige Aufstellhöhe über NN, maximum 2,000 m
- Current consumption with solenoid ON, average 200 mA
- Classification ZVEI CB24I, Sink C1, C2
- Voltage drop Ud, maximum 4 V
- Wiring capacity 50 nF
- Response time safety outputs in case of switch-off by actuator, maximum 100 ms
- Series-wiring Yes
- Latching force, adjustable, position 1 25 N
- Storage and transport temperature, maximum +90 °C
- Degree of pollution to IEC/EN 60664-1 3
- External wiring and device fuse rating 2 A gG
- Voltage, Utilisation category DC12 24 VDC
- Manual release Yes
- Switch distance 2 mm
- Degree of protection IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
- Restistance to shock 30 g / 11 ms
- Test pulse interval, minimum 100 ms
- Integral System Diagnostics, status Yes
- Tightening torque of the fixing screws, minimum 6 Nm
- Note (series connection of the sensors) Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
- Operating voltage, maximum 26.4 VDC
- Duty cycle solenoid 100 %
- Test pulse interval, typical 1000 ms
- Versions short-circuit proof, p-type
Product condition
New Factory Sealed
New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of AZM300Z-I2-ST-SD2P on Applied Automation is $877.00. Order now.
AZM300Z-I2-ST-SD2P Related Documents
Manufacturer warranty
AZM300Z-I2-ST-SD2P Schmersal
$877.00
Your price can be lower.
Log in or Create account to check your discount
This part can be ordered
Select Qty:
$877.00
$877.00 each
This item may have a lead time. To ensure availability before placing your order, chat with our team—we'll confirm for you right away!
Fast Shipping & Delivery
We deliver nationwide and international
Secure Payment Processing
Your Safety, Our Priority.
Warranty
Manufacturer warranty
Responsive Customer Support
Got Questions? We've Got Answers!
Need more details?
Feel free to chat with us
About the manufacturer
Applied Automation is an authorized Schmersal distributor, proudly offering a diverse range of innovative safety and automation solutions tailored to meet the rigorous demands of modern industries. Schmersal is a globally renowned manufacturer specializing in the development and production of high-quality safety systems designed to protect both personnel and machinery across various industrial sec...
Recently viewed products
Relevant products
FAQ
What is the price of AZM300Z-I2-ST-SD2P?
Purchase the AZM300Z-I2-ST-SD2P from Applied Automation at the price of $877.00. Order today.
Out if stock but available for backorder.
AZM300Z-I2-ST-SD2P Schmersal - Solenoid interlocks; Repeated individual coding with RFID technology; Coding level "High" according to ISO 14119; Connector M12, 8-pole; Power to unlock; Guard locking monitored; serial diagnostic output; Hygienic design; Protection class IP 69; Suitable
What can I help you find today?