AZM300Z-I1-ST-SD2P-A Schmersal Safety Switch Interlocks

Product Details

• Coding level according to ISO 14119
  High
• Power to lock
  Yes
• Short-circuit recognition
  Yes
• Clamping force in accordance with ISO14119 Fzh
  1,150 N
• Note (series connection of the sensors)
  Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
• Storage and transport temperature, maximum
  +90 °C
• Operating voltage, maximum
  26.4 VDC
• Duty cycle solenoid
  100 %
• Frequency band RFID
  125 kHz
• Series-wiring
  Yes
• Manual release
  Yes
• Switch distance
  2 mm
• Length of sensor
  120 mm
• Ambient temperature, minimum
  +0 °C
• Protection rating
  III
• Current consumption with solenoid ON, peak
  350 mA / 200 ms
• Active principle
  RFID
• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Note (Mechanical lifetime)
  When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
• Clamping force, maximum Fmax
  1,500 N
Tightening torque for the fixing screws, maximum
7 Nm
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Zulässige Aufstellhöhe über NN, maximum
2,000 m
Degree of pollution to IEC/EN 60664-1
3
Test pulse interval, minimum
100 ms
general information
Individual coding
Serial diagnostics
Yes
Number of fail-safe digital outputs
2
Terminal Connector
Connector M12, 8-pole, A-coded
Note (Relative humidity)
non-condensing, non-icing
Operating voltage, minimum
20.4 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Transmit power, maximum
-6 dB/m
Guard locking monitored
Yes
Mechanical life, minimum
1,000,000 Operations
Tightening torque of the fixing screws, minimum
6 Nm
Length of sensor chain, maximum
200 m
Ambient temperature, maximum
+60 °C
Rated impulse withstand voltage Uimp
0.8 kV
External wiring and device fuse rating
2 A gG
Voltage, Utilisation category DC12
24 VDC
Standards
EN ISO 13849-1, EN ISO 14119, IEC 60947-5-3
Short circuit detection
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Ensured switch distance ON Sao
1 mm
Storage and transport temperature, minimum
-10 °C
Rated insulation voltage Ui
32 VDC
Current consumption with solenoid ON, average
200 mA
Current consumption at 24V
5 mA
Latching
Yes
Latching force, adjustable, position 2
50 N
Width of sensor
87.5 mm
Time to readiness, maximum
5,000 ms
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
No-load supply current I0
100 mA
Switching thresholds
−3 V … 5 V (Low), 15 V … 30 V (High)
Versions
short-circuit proof, p-type
Integral System Diagnostics, status
Yes
Type of the fixing screws
2x M6
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Height of sensor
35 mm
Restistance to shock
30 g / 11 ms
Notes (Power supply, general)
stabilised PELV power supply
Classification ZVEI CB24I, Sink
C1, C2
Voltage drop Ud, maximum
4 V
Wiring capacity
50 nF
Gross weight
550 g
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Safety functions
Yes
Latching force, adjustable, position 1
25 N
Ensured switch distance OFF Sar
20 mm
Relative humidity, maximum
93 %
Overvoltage category
III
Switching frequency, maximum
0.5 Hz
Current, Utilisation category DC13
0.05 A
Voltage, Utilisation category DC13
24 VDC
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Test pulse interval, typical
1000 ms
Current leakage Ir
0.5 mA
Classification ZVEI CB24I, Source
C2
Duration of risk, maximum
200 ms
Current, Utilisation category DC12
0.05 A
Test pulse duration, maximum
0.5 ms
Operation current
150 mA

AZM300Z-I1-ST-SD2P-A Related Documents