AZM300B-I2-ST-SD2P-A Schmersal Safety Switches

Product Details

• Response time safety outputs in case of switch-off by actuator, maximum
  100 ms
• Active principle
  RFID
• Series-wiring
  Yes
• Tightening torque for the fixing screws, maximum
  7 Nm
• Length of sensor chain, maximum
  200 m
• Storage and transport temperature, maximum
  +90 °C
• Note (Relative humidity)
  non-condensing, non-icing
• Operating voltage, minimum
  20.4 VDC
• Switching thresholds
  −3 V … 5 V (Low), 15 V … 30 V (High)
• Voltage, Utilisation category DC13
  24 VDC
• Coding level according to ISO 14119
  High
• Duration of risk, maximum
  200 ms
• Integral System Diagnostics, status
  Yes
• Number of fail-safe digital outputs
  2
• Clamping force, maximum Fmax
  1,500 N
• Width of sensor
  87.5 mm
• Zulässige Aufstellhöhe über NN, maximum
  2,000 m
• Operating voltage, maximum
  26.4 VDC
• Test pulse duration, maximum
  0.5 ms
• Versions
  short-circuit proof, p-type
Current, Utilisation category DC13
0.05 A
Standards
IEC 61508, IEC 60947-5-3, EN ISO 13849-1
Safety functions
Yes
Serial diagnostics
Yes
Ensured switch distance ON Sao
1 mm
Height of sensor
35 mm
Resistance to vibrations to EN 60068-2-6
10 … 150 Hz, amplitude 0.35 mm
Current consumption with solenoid ON, average
200 mA
Classification ZVEI CB24I, Sink
C1, C2
Voltage, Utilisation category DC12
24 VDC
Wiring capacity
50 nF
Transmit power, maximum
-6 dB/m
Short-circuit recognition
Yes
Mechanical life, minimum
1,000,000 Operations
Latching force, adjustable, position 2
50 N
Note (length of the sensor chain)
Cable length and cross-section change the voltage drop dependiing on the output current
Note (series connection of the sensors)
Unlimited number of devices, oberserve external line fusing, max. 31 devices in case of serial diagnostic SD
Relative humidity, maximum
93 %
Degree of pollution to IEC/EN 60664-1
3
Notes (Power supply, general)
stabilised PELV power supply
Duty cycle solenoid
100 %
Current, Utilisation category DC12
0.05 A
Operation current
150 mA
general information
Individual coding, multiple teaching
Latching
Yes
Type of the fixing screws
2x M6
Tightening torque of the fixing screws, minimum
6 Nm
Ambient temperature, maximum
+60 °C
Rated insulation voltage Ui
32 VDC
Required rated short-circuit current to EN 60947-5-1
100 A
Gross weight
610 g
Short circuit detection
Yes
Response time safety outputs in case of switch-off by safety inputs, maximum
1.5 ms
Ensured switch distance OFF Sar
20 mm
Length of sensor
120 mm
Restistance to shock
30 g / 11 ms
Current consumption with solenoid ON, peak
350 mA / 200 ms
Classification ZVEI CB24I, Source
C2
Frequency band RFID
125 kHz
Power to lock
Yes
Angular offset between interlocking device and actuator, maximum
2 °
Switch distance
2 mm
Ambient temperature, minimum
+0 °C
Rated impulse withstand voltage Uimp
0.8 kV
Switching frequency, maximum
0.5 Hz
Current consumption at 24V
5 mA
Test pulse interval, typical
1000 ms
Protection rating
III
No-load supply current I0
100 mA
Overvoltage category
III
External wiring and device fuse rating
2 A gG
Test pulse interval, minimum
100 ms
Current leakage Ir
0.5 mA
Voltage drop Ud, maximum
4 V
Enclosure material
Plastic, glass-fibre reinforced thermoplastic, self-extinguishing
Actuator monitored
Yes
Latching force, adjustable, position 1
25 N
Note (Mechanical lifetime)
When using as door stop: ≥ 50.000 operations (door mass ≤ 5 kg and actuating speed ≤ 0.5 m/s)
Terminal Connector
Connector M12, 8-pole, A-coded
Manual release
Yes
Time to readiness, maximum
5,000 ms
Clamping force in accordance with ISO14119 Fzh
1,150 N
Degree of protection
IP66 to EN 60529, IP67 to EN 60529, IP69 to EN 60529
Storage and transport temperature, minimum
-10 °C

AZM300B-I2-ST-SD2P-A Related Documents