SU19.1/102/115 Pepperl + Fuchs Electronic Components

Product Details

• Ambient light limit
  10000 Lux
• Operating voltage
  10 ... 30 V DC
• Response time
  High speed mode: 30 µs , Standard mode: 160 µs , High resolution: 2 ms , Automatic: 160 µs ~ 2 ms (choice by the sensor), Glass mode: 2 ms
• Connection
  2 m fixed cable , 1 x 0.25 mm², PVC
• MTTFd
  500 a
• Diagnostics indicator
  7-segment display
• Voltage drop
  ≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA
• UL approval
  cULus Listed, Class 2 Power Source, Type 1 enclosure
• Diagnostic Coverage (DC)
  0 %
• Switching voltage
  max. 30 V DC
• Sensor range
  up to 150 mm (KLR-C02-2,2-2,0-K146)
• Switching current
  max. 100 mA , resistive load
• Housing width
  9 mm
• Gang mounting
  maximum 20 units
• Function indicator
  LED yellow: static illumination switching state, flashes when falling short of the stability control
• Repeat accuracy
  ≤ 0.5 % of adjusted sensor range
• EAC conformity
  TR CU 020/2011
• Mass
  45 g
• Mission Time (TM)
  20 a
• Light type
  modulated visible red light , 660 nm
Control elements
Button (Mode) for menu choice ; Button (Set) for Teach-In ; Button (Up/Down) for fine adjusting and parameterization
Ripple
10 %
Ambient temperature
-10 ... 55 °C (14 ... 131 °F)
Product standard
EN 60947-5-2
Storage temperature
-20 ... 70 °C (-4 ... 158 °F)
Housing
PC
Light source
LED
Detection range
up to 450 mm (KLE-C01-2,2-2,0-K116)
Switching type
light/dark on selectable programmable
No-load supply current
≤ 30 mA
Switching frequency
High speed mode: 16 kHz , Standard mode: 3 kHz , High resolution: 250 Hz ~ 3 kHz (selection by the sensor), Automatic: 250 Hz , Glass mode: 250 Hz
Timer function
ON-delay, OFF-delay, one shot, pulse extension ; adjustable 0 ... 999 ms in 1 ms increments
Housing depth
62.3 mm
Degree of protection
IP50
Operation indicator
Power on: static illumination , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Signal output
1 NPN, short-circuit protected open collector
CCC approval
CCC approval / marking not required for products rated ≤36 V
Housing height
34.5 mm

SU19.1/102/115 Related Documents