SU19/110/115A/126A Pepperl + Fuchs Electronic Components

Product Details

• Detection range
  up to 450 mm (KLE-C01-2,2-2,0-K116)
• Function indicator
  LED yellow: static illumination switching state, flashes when falling short of the stability control
• Switching current
  max. 100 mA , resistive load
• CCC approval
  CCC approval / marking not required for products rated ≤36 V
• Housing
  PC
• Diagnostic Coverage (DC)
  0 %
• No-load supply current
  ≤ 30 mA
• Product standard
  EN 60947-5-2
• Housing depth
  62.3 mm
• Ambient light limit
  10000 Lux
• Operating voltage
  10 ... 30 V DC
• Switching frequency
  High speed mode: 16 kHz , Standard mode: 3 kHz , High resolution: 250 Hz ~ 3 kHz (selection by the sensor), Automatic: 250 Hz , Glass mode: 250 Hz
• Housing height
  34.5 mm
• Operation indicator
  Power on: static illumination , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
• Switching type
  light/dark on selectable programmable
• Storage temperature
  -20 ... 70 °C (-4 ... 158 °F)
• Mission Time (TM)
  20 a
• Stability alarm output
  1 push-pull (4 in 1) output NPN/PNP , short-circuit protected
• EAC conformity
  TR CU 020/2011
• Connection
  200 mm, PVC cable with M8 connector, 4-pin
Gang mounting
maximum 20 units
Signal output
1 push-pull (4 in 1) output NPN/PNP , short-circuit protected
Timer function
ON-delay, OFF-delay, one shot, pulse extension ; adjustable 0 ... 999 ms in 1 ms increments
Degree of protection
IP50
Light source
LED
Diagnostics indicator
7-segment display
Voltage drop
≤ 2 V DC at 100 mA ; ≤ 0.7 V at 10 mA
Ambient temperature
-10 ... 55 °C (14 ... 131 °F)
MTTFd
500 a
Ripple
10 %
Repeat accuracy
≤ 0.5 % of adjusted sensor range
Mass
45 g
Light type
modulated visible red light , 660 nm
Control elements
Button (Mode) for menu choice ; Button (Set) for Teach-In ; Button (Up/Down) for fine adjusting and parameterization
Response time
High speed mode: 30 µs , Standard mode: 160 µs , High resolution: 2 ms , Automatic: 160 µs ~ 2 ms (choice by the sensor), Glass mode: 2 ms
Housing width
9 mm
Sensor range
up to 150 mm (KLR-C02-2,2-2,0-K146)
Switching voltage
max. 30 V DC
UL approval
cULus Listed, Class 2 Power Source, Type 1 enclosure

SU19/110/115A/126A Related Documents