OBT40-R102-2P1-IO Pepperl + Fuchs Electronic Components

Product Details

• Light source
  LED
• Ripple
  max. 10 %
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Cable length
  2 m
• Light type
  modulated visible red light
• Function indicator
  LED yellow: constantly on - object detected, constantly off - object not detected
• Switching voltage
  max. 30 V DC
• Housing width
  13.9 mm
• Reference target
  standard white, 100 mm x 100 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• No-load supply current
  < 25 mA at 24 V supply voltage
• Switching frequency
  500 Hz
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Mass
  approx. 36 g
• Detection range
  10 ... 40 mm
• Interface type
  IO-Link ( via C/Q = BK )
• Compatible master port type
  A
• Voltage drop
  ≤ 1.5 V DC
• Housing depth
  18.3 mm
Detection range max.
10 ... 50 mm
Mission Time (TM)
20 a
Device ID
0x110513 (1115411)
Switching current
max. 100 mA , resistive load
Product standard
EN 60947-5-2
Housing
PC (Polycarbonate)
Black-white difference (6 %/90 %)
approx. 1 mm
Operating voltage
10 ... 30 V DC
Protection class
III
SIO mode support
yes
EAC conformity
TR CU 020/2011
Connection
2 m fixed cable
LED risk group labelling
exempt group
Opening angle
approx. 5 °
Transfer rate
COM2 (38.4 kBit/s)
Usage category
DC-12 and DC-13
Housing height
31.9 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Device profile
Smart Sensor
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Optical face
Float glass
Diameter of the light spot
approx. 3 mm at 40 mm
Diagnostic Coverage (DC)
0 %
Switching type
, C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on
Response time
1 ms
Background suppression
starts from 50 mm
MTTFd
600 a
IO-Link revision
1.1
Min. cycle time
2.3 ms
Communication interface
IEC 61131-9
Degree of protection
IP67 / IP69 / IP69K

OBT40-R102-2P1-IO Related Documents