OBT40-R101-2P1-IO Pepperl + Fuchs Electronic Components

Product Details

• Diameter of the light spot
  approx. 3 mm at 40 mm
• Diagnostic Coverage (DC)
  0 %
• Min. cycle time
  2.3 ms
• Response time
  1 ms
• Cable length
  2 m
• LED risk group labelling
  exempt group
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Optical face
  PMMA
• MTTFd
  600 a
• IO-Link revision
  1.1
• Device ID
  0x110503 (1115395)
• Voltage drop
  ≤ 1.5 V DC
• Degree of protection
  IP67 / IP69 / IP69K
• Light type
  modulated visible red light
• No-load supply current
  < 25 mA at 24 V supply voltage
• Device profile
  Smart Sensor
• Switching frequency
  500 Hz
• Housing
  PC (Polycarbonate)
Light source
LED
Ripple
max. 10 %
Switching type
, C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on
Usage category
DC-12 and DC-13
Housing height
31.9 mm
Detection range
10 ... 40 mm
Mission Time (TM)
20 a
Protection class
III
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Communication interface
IEC 61131-9
Housing width
13.9 mm
Detection range max.
10 ... 50 mm
Opening angle
approx. 5 °
Compatible master port type
A
EAC conformity
TR CU 020/2011
Connection
2 m fixed cable
Black-white difference (6 %/90 %)
approx. 1 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Interface type
IO-Link ( via C/Q = BK )
Switching voltage
max. 30 V DC
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Housing depth
18.3 mm
Background suppression
starts from 50 mm
Operating voltage
10 ... 30 V DC
SIO mode support
yes
Product standard
EN 60947-5-2
Mass
approx. 36 g
Reference target
standard white, 100 mm x 100 mm
Ambient light limit
EN 60947-5-2 : 40000 Lux
Transfer rate
COM2 (38.4 kBit/s)
Switching current
max. 100 mA , resistive load
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)

OBT40-R101-2P1-IO Related Documents