OBT40-R102-2P1-IO-0,3M-V1 Pepperl + Fuchs Electronic Components

Product Details

• Diameter of the light spot
  approx. 3 mm at 40 mm
• Ripple
  max. 10 %
• Operating voltage
  10 ... 30 V DC
• Compatible master port type
  A
• Product standard
  EN 60947-5-2
• Housing
  PC (Polycarbonate)
• MTTFd
  600 a
• IO-Link revision
  1.1
• Switching voltage
  max. 30 V DC
• Storage temperature
  -40 ... 70 °C (-40 ... 158 °F)
• Detection range max.
  10 ... 50 mm
• Opening angle
  approx. 5 °
• Device profile
  Smart Sensor
• Switching type
  , C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on
• UL approval
  E87056 , cULus Listed , class 2 power supply , type rating 1
• Degree of protection
  IP67 / IP69 / IP69K
• Reference target
  standard white, 100 mm x 100 mm
• No-load supply current
  < 25 mA at 24 V supply voltage
• SIO mode support
  yes
• Switching frequency
  500 Hz
Housing depth
18.3 mm
Detection range
10 ... 40 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Usage category
DC-12 and DC-13
Communication interface
IEC 61131-9
Connection
300 mm fixed cable with M12 x 1, 4-pin connector
Background suppression
starts from 50 mm
Transfer rate
COM2 (38.4 kBit/s)
Signal output
2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Response time
1 ms
Optical face
Float glass
Light type
modulated visible red light
Operation indicator
LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
Min. cycle time
2.3 ms
Housing width
13.9 mm
Black-white difference (6 %/90 %)
approx. 1 mm
Diagnostic Coverage (DC)
0 %
Protection class
III
Process data width
Process data input 1 Bit, Process data output 2 Bit
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
Light source
LED
Mission Time (TM)
20 a
Device ID
0x110513 (1115411)
Switching current
max. 100 mA , resistive load
Housing height
31.9 mm
Cable length
0.3 m
LED risk group labelling
exempt group
Ambient light limit
EN 60947-5-2 : 40000 Lux
Interface type
IO-Link ( via C/Q = BK )
Voltage drop
≤ 1.5 V DC
EAC conformity
TR CU 020/2011
Mass
approx. 17 g

OBT40-R102-2P1-IO-0,3M-V1 Related Documents