OBT250-R103-EP-IO-0,3M-V3-L Pepperl + Fuchs Electronic Components

Product Details

• Light source
  laser diode
• Black-white difference (6 %/90 %)
  < 5 % at 120 mm
• Protection class
  III
• Process data width
  Process data input 1 Bit, Process data output 2 Bit
• Response time
  300 µs
• Housing height
  36.5 mm
• Detection range max.
  7 ... 250 mm
• max. pulse energy
  10.4 nJ
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• Device ID
  0x110605 (1115653)
• SIO mode support
  yes
• EAC conformity
  TR CU 020/2011
• Housing
  PC (Polycarbonate)
• Detection range
  7 ... 250 mm
• Mission Time (TM)
  20 a
• IO-Link revision
  1.1
• Switching current
  max. 100 mA , resistive load
• Housing width
  15 mm
• Optical face
  PMMA
• Wave length
  680 nm
MTTFd
560 a
Operating voltage
10 ... 30 V DC
Transfer rate
COM2 (38.4 kBit/s)
Laser safety
EN 60825-1:2014
Housing depth
26.7 mm
Adjustment range
25 ... 250 mm
Beam divergence
> 5 mrad d63 < 1 mm in the range of 150 mm ... 250 mm
Control elements
Light-on/dark-on changeover switch
Signal output
1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected, overvoltage protected
Product standard
EN 60947-5-2
Mass
approx. 17 g
Reference target
standard white, 100 mm x 100 mm
Pulse length
3 µs
Diagnostic Coverage (DC)
0 %
Device profile
Smart Sensor
Usage category
DC-12 and DC-13
FDA approval
IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Cable length
0.3 m
Note
LASER LIGHT , DO NOT STARE INTO BEAM
Diameter of the light spot
approx. 1 mm at a distance of 200 mm
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Compatible master port type
A
Voltage drop
≤ 1.5 V DC
Degree of protection
IP67 / IP69 / IP69K
Light type
modulated visible red light
Opening angle
approx. 0.3 °
Ripple
max. 10 %
Switching voltage
max. 30 V DC
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Connection
300 mm fixed cable with M8 x 1, 3-pin connector
Detection range min.
7 ... 25 mm
Ambient light limit
EN 60947-5-2 40000 Lux
Interface type
IO-Link ( via C/Q = pin 4 )
Switching type
The switching type of the sensor is adjustable. The default setting is: C/Q - Pin4: NPN normally open / light-on, PNP normally closed / dark-on, IO-Link,
Communication interface
IEC 61131-9
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Laser class
1
Repetition rate
approx. 13 kHz
No-load supply current
< 20 mA at 24 V supply voltage
Min. cycle time
2.3 ms
Switching frequency
1650 Hz
Ambient temperature
-40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains

OBT250-R103-EP-IO-0,3M-V3-L Related Documents