OBT20-R102-2P1-IO Pepperl + Fuchs Electronic Components

Product Details

• Black-white difference (6 %/90 %)
  approx. 1 mm
• Operation indicator
  LED green: constantly on - power on, flashing (4Hz) - short circuit, flashing with short break (1 Hz) - IO-Link mode
• IO-Link revision
  1.1
• Switching type
  , C/Q - Pin4: NPN normally closed / dark-on, PNP normally open / light-on, IO-Link, /Q - Pin2: NPN normally open / light-on, PNP normally closed / dark-on
• Reference target
  standard white, 100 mm x 100 mm
• Device profile
  Smart Sensor
• Switching current
  max. 100 mA , resistive load
• Ambient temperature
  -40 ... 60 °C (-40 ... 140 °F) , fixed cable, -25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for conveyor chains
• Cable length
  2 m
• Detection range
  7 ... 20 mm
• Ripple
  max. 10 %
• Light type
  modulated visible red light
• Mission Time (TM)
  20 a
• Protection class
  III
• Min. cycle time
  2.3 ms
• Housing height
  31.9 mm
• Detection range max.
  5 ... 25 mm
• Ambient light limit
  EN 60947-5-2 : 40000 Lux
• Operating voltage
  10 ... 30 V DC
• Signal output
  2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Switching frequency
500 Hz
Connection
2 m fixed cable
Background suppression
starts from 25 mm
Diagnostic Coverage (DC)
0 %
Device ID
0x110511 (1115409)
Usage category
DC-12 and DC-13
Storage temperature
-40 ... 70 °C (-40 ... 158 °F)
Opening angle
approx. 3 °
Transfer rate
COM2 (38.4 kBit/s)
Switching voltage
max. 30 V DC
Product standard
EN 60947-5-2
Degree of protection
IP67 / IP69 / IP69K
Diameter of the light spot
approx. 1.5 mm at 20 mm
No-load supply current
< 25 mA at 24 V supply voltage
Process data width
Process data input 1 Bit, Process data output 2 Bit
Communication interface
IEC 61131-9
Housing depth
18.3 mm
LED risk group labelling
exempt group
Interface type
IO-Link ( via C/Q = BK )
Voltage drop
≤ 1.5 V DC
Housing width
13.9 mm
Light source
LED
MTTFd
600 a
Function indicator
LED yellow: constantly on - object detected, constantly off - object not detected
Compatible master port type
A
EAC conformity
TR CU 020/2011
Optical face
Float glass
SIO mode support
yes
Response time
1 ms
Housing
PC (Polycarbonate)
UL approval
E87056 , cULus Listed , class 2 power supply , type rating 1
Mass
approx. 36 g

OBT20-R102-2P1-IO Related Documents